Windows XP Home
Home Up XP Professional

 

HOBBLING THE GUEST ACCOUNT

Do you really want to turn off the Windows XP account called Guest because you know it doesn't have a password and you're worried that some hacker or bad program is going to get into it?

Relax.

In the old days, a guest account on a networked PC served as a convenient way to let people onto a PC or network temporarily. The guest didn't need to know a password to log on, but the guest couldn't perform as many computing functions, either. That's where the term "guest" came from.

In XP, Windows makes it easy to "turn on" or "turn off" the Guest account. Here's how:

  1. Click Start, Control Panel ,User Accounts. The Guest account is the last account listed. If Guest appears as one of the accounts on the Windows Welcome screen, you see an on-screen message that says Guest account is on. If there is no Guest on the welcome screen, Windows says Guest account is off.
  2. Click the Guest account. You see the User Accounts dialog box.
  3. If you don't want Guest to be visible on the Welcome screen, click Turn Off the Guest Account. If you want Guest to be visible, click Turn On the Guest Account.
  4. Close the User Accounts dialog box.

You might assume that this procedure turns the account called Guest on or off. It doesn't. Windows XP is fooling you. In Windows XP, Guest plays a pivotal role. Among other things, Windows uses Guest to communicate between computers, run print jobs, and perform a plethora of other behind-the-scenes functions. Windows can't let you turn off the Guest account. If you did, all sorts of things would go bump in the night.

You may find detailed instructions on the Web that show you how to really turn off Guest. It's difficult, but it can be done. Resist the temptation. Leave Guest going.

 

ACCOUNTING FOR WINDOWS XP USERS

Everyone who uses Windows XP needs a user account. A user account is like a cocktail party nametag that helps Windows recognize who's sitting at the keyboard. Windows XP dishes out three types of user accounts: Administrator, Limited, and Guest.

Each type of account gets to do different functions on the computer. If the computer were an apartment building, the administrator would be the manager, the limited accounts would be the tenants, and guests would only get to drop by and use the bathroom in the lobby.

In computer lingo that means the administrator controls the entire computer, deciding who gets to use it and what they can do on it. Limited accounts can use most of the computer, but they can't make any big changes to it. And guests, well, they can use the computer, but because the computer doesn't recognize them by name, their actions are tightly restricted.

 

WINDOWS XP ACTIVATION FEATURE

When you install Windows XP, an annoying Window pops up, asking you to "activate" your version of Windows. When you click the Activate button, Windows XP takes a "picture" of your computer's components, links them to the serial number on your copy of Windows XP, and sends that information to Microsoft over the Internet.

Then, if you or anybody else ever tries to install that same version of Windows on a different computer, Windows XP says you're using somebody else's version of Windows XP, and it won't work.

 

AVOIDING EVIL ADD-ONS AND HIJACKERS

Microsoft designed Internet Explorer to let programmers add extra features through add-ons. By installing an add-on program -- toolbars, stock tickers, and program launchers, for instance -- users could wring a little more work out of Internet Explorer. Similarly, many sites use ActiveX -- a fancy word for little programs that add animation and other flashy tricks to a Web site.

Unfortunately, dastardly programmers began creating add-ons and ActiveX programs that harm users. Some of these can spy on your activities, bombard your screen with additional ads, redirect your home page to another site, or make your modem dial long-distance numbers to porn sites. Worst yet, some renegade add-ons can install themselves as soon as you visit a Web site -- without asking your permission.

For instance, some sites send a barrage of pop-up windows to Internet Explorer. As you struggle to close them all, you may accidentally click an OK button, allowing the site to install its evil add-on.

Windows XP's Service Pack 2 packs some new guns to combat these troublemakers. First, if a site tries to sneak a program onto your computer, Internet Explorer quickly blocks it, sending a warning across the top of Internet Explorer's screen. Clicking the warning reveals your options, which are basically to allow the download or software install, or to get more information about it.

 

MORE ABOUT ADD-ONS AND HIJACKERS

Last week's tip told you about some of Windows XP Service Pack 2's new ability to stop Web sites from sneaking software onto your computer. But unfortunately, Internet Explorer can't tell the good downloads from the bad, leaving the burden of proof to you. But if you see a message that Internet Explorer has blocked a program and you haven't requested a download, chances are the site's trying to harm you: Don't try to thwart the warning and download the add-on or ActiveX program.

If a bad add-on creeps in somehow, you're not completely out of luck. Internet Explorer's Add-on Manager lets you disable it. To see all the add-on programs installed in Internet Explorer (and remove any that you know are bad), follow these steps:

  1. Choose Manage Add-ons from Internet Explorer's Tools menu. The Manage Add-ons window appears, showing all add-ons used by the currently viewed page.
  2. Click the Add-on that gives you trouble and choose Disable.
  3. Repeat the process for each add-on you don't want and then click the OK button. You probably need to restart Internet Explorer for the change to take effect.

Not all add-ons are bad. Many good ones let you play movies, hear sounds, or view special content on a Web site. Don't delete an add-on simply because it's listed in the Add-on Manager.

  • On the rare instance that disabling an add-on prevents a page from loading, click that add-on's name in Step 2 of the preceding steps and click the Enable button to return it to working order.
  • Although Internet Explorer's Add-on Manager disables add-ons fairly easily, it's quite difficult to remove them entirely. Look for the add-on's name in your Control Panel's Add or Remove Programs area. If it's listed, you can remove it just like any other program.
  • How the heck do you tell the good add-ons from the bad? Unfortunately, there's no sure way of telling, although the name listed under Publisher provides one clue. The best way is to avoid being hijacked in the first place, mainly by not installing things Internet Explorer has tried to block.

 

ADDRESS AUTOCOMPLETE

To help eliminate errors in typing and speed up the tedious process of typing in URLs in your Web browser, Windows employs a feature called AutoComplete. This nifty feature looks at whatever few characters of the URL address you type in the Address bar and, based on them, attempts to match them to one of the complete addresses that are stored in the Address bar drop-down list. To visit any one of the pages listed in the Address bar drop-down list, click that name in the drop-down list. Internet Explorer then enters the complete URL address of the Web site you clicked in the Address bar and automatically displays the page.

 

DUAL-BOOT CONSIDERATIONS

If your PC is set up to run more than one operating system, you need to exercise a bit more than normal care when you install programs. It is generally considered safest to install different operating systems on different disk drives, or at least on different partitions of the same physical drive. If you use the same program in more than one of those operating systems, you may be tempted to use the same program folder for each operating system. While this may work, it is usually not a good idea. The program may need different versions of certain shared files for different operating systems, and this could mean the program will only work correctly on the last operating system for which it was installed.

 

BURNING (WRITING INFORMATION ONTO) CDS

Windows XP finally caught up with the computers of the day, and it handles the recordable CD drives built into most new computers. To copy any file or files to a recordable CD drive, right-click on the file or files, choose Send To from the menu that appears, and select Writable CD. Pop! A little window pops up with the message that you have files waiting to be copied to the CD. Insert a CD into the drive, click the Start button, and choose My Computer. Open your recordable CD with a double-click and select Write these files to CD to copy them to your CD.

 

DOUBLE-CROSSED BY DOUBLE-CLICKS?

In an effort to make things easier, Windows lets you choose whether a single-click or a double-click should open a file or folder.

But if you're not satisfied with the click method Windows Me uses, here's how to change it:

  1. Open the Control Panel from the Start button's Settings menu and choose Folder Options.
  2. Choose your click preference in the Click Items As Follows section.
  3. Click OK to save your preferences.

Don't like to follow steps? Just click the Folder Options' Restore Defaults button, and Windows will bring back double-clicking.

 

I CLICKED THE WRONG BUTTON (BUT I HAVEN'T LIFTED MY FINGER YET)

Clicking the mouse takes two steps: a push and a release. If you click the wrong button on-screen and haven't lifted your finger yet, press the Esc button and slowly slide the mouse pointer off the button on-screen. Then take your finger off the mouse.

The screen button pops back up, and Windows Me pretends nothing happened. Thankfully.

 

DISCOVERING THE CHARACTER MAP

Windows's Character Map lets you add weird foreign characters, such as a, [sterling], or even ß, into your document.

Character Map makes it so easy to give your documents that extra shine a la belle étoile. To get there, click Start, Programs, Accessories, System Tools, Character Map and follow these steps to put a foreign character in your work:

  1. Make sure that the current font - the name for the style of the characters on the page - shows in the Font box. If the current font is not showing, click the down arrow and click the font when it appears in the drop-down list.
  2. Scan the Character Map box until you see the symbol you're after; then pounce on that character with a double-click. The symbol appears in the Characters to Copy box.
  3. Click Copy to send the character to the Clipboard.
  4. Click the Close button to close the Character Map.
  5. Click in the document where you want the new symbol or character to appear.
  6. Press Ctrl+V, and the new character pops right in there. (Give it a second. Sometimes it's slow.)

The symbols in the Character Map box are easier to see if you hold down the mouse button and move the pointer over them.

  • When working with foreign words, keep the Character Map handy as an icon, ready for consultation.
  • For some fun symbols, switch to the Wingdings font. It's full of little doodads to spice up your work.
  • You can grab several characters at a time by double-clicking each of them and then copying them into your work as a chunk. You don't have to keep returning to the Character Map for each one.

 

TIME FOR THE ANNUAL CLEAN-A-FEST

Should old acquaintance be forgot . . . But over the course of a year many computer acquaintances can be forgotten. Or dropped. Or misplaced. Or whatever. Creating an annual checklist to keep your Windows system lean, mean, and clean is a good idea:

  • Review all data files on your computer and archive as necessary: Perhaps the biggest annual task is doing a comprehensive review of the data files on your computer. If you have been doing monthly archives, you can now add other files to the annual pile and shuffle them off to archive media.
  • Review your Web browser's favorites list and delete items you don't use anymore: You should also plan on firing up your Web browser and reviewing the items in your favorites list. Chances are good that what you considered your favorites a year ago no longer qualify as such. Keeping your favorites list pared down helps you find what you need faster.
  • Visit manufacturers' Web sites to check for updates: Take some time to visit the Web sites for the manufacturers of you system hardware. Check for new drivers for printers, scanners, cameras, and so on, that have been released during the previous 12 months. Updating your drivers can improve speed and reliability.
  • Review your security precautions and update them as necessary: It's a cruel, cruel world out there, and some of the perpetrators of cruelty want to get up close and personal with your computer. Your job is to stop them. You should, at least on an annual basis, make sure that you review your security precautions. Make sure you do your review with an eye toward major security changes in the past year and how you can be prepared for the coming year.
  • Update your program inventory: Work habits change; tools come and go. You need to make sure that your Windows system always reflects the way you currently use your computer.

 

CLEANING UP BEFORE A REINSTALL

Sometimes removing a program and reinstalling it isn't sufficient. The problems may persist; and in some cases, pieces of the old program get left behind, even if the uninstaller tells you that it got everything.

If you believe that remnants of an old program are hampering your attempts to get it to reinstall correctly, try this:

  1. Use Add or Remove Programs to remove the program.
  2. Even if the uninstaller tells you that it got everything, choose Start, Run, type regedit, and press Enter.
  3. Inside the Registry Editor, search for the name of the program by choosing Edit, Find.

    Make sure all three boxes -- Keys, Values, and Data -- are checked. You might not be able to find the precise program name, but you may be able to find something similar to it, or possibly the manufacturer's name.

  4. Keep searching (use the F3 key or the Find Next button) until you find a major entry for the program.

    Usually you can find a major entry for the program itself, as opposed to minor entries for certain kinds of documents or filename extensions.

  5. If you find an entry that seems to include lots of settings for the program, right-click it and choose Export.
  6. Use the Export Registry File dialog box to put the contents of this key on your desktop.

    Give the exported Registry key a filename that you can remember and click Save.

  7. In the Registry Editor, click this key and press Delete.

    Doing so removes all the old information about the entry from your computer -- and may help knock loose whatever was preventing the reinstallation from working correctly.

  8. Reinstall the program that's been giving you problems.

    You'll probably insert a CD or double-click a downloaded file.

    Chances are very good that going through the additional step of scouring the Registry to remove all the old, potentially bad settings makes the program work right.

  9. If the reinstalled version of the program still doesn't work, double-click the Registry key on your desktop to put the Registry back the way you found it.

    That doesn't fix the problem. But it does mean any changes you made to the Registry are undone.

 

SINGLE-CLICKING VS DOUBLE-CLICKING

Prefer to always single-click instead of double-click? Then choose Folder Options from the Control Panel's Appearance and Themes area, and choose the single-click option: Single-Click to Open an Item (Point to Select). Prefer the traditional double-click way? Then go to the same place and choose the other option: Double-Click to Open an Item (Single-Click to Select).

 

WHAT'S ON THE CLIPBOARD?

The Clipboard is a special area inside memory where Windows 98 keeps track of information that's been cut or copied. The Clipboard Viewer is a program that lets you see the information that's currently on the Clipboard.

To see the Clipboard Viewer, click the Start button and choose Programs from the menu. Choose Accessories and then Systems Tools. Finally, choose Clipboard Viewer, which displays any information you've cut or copied recently.

The Clipboard holds only one thing at a time. Each time you cut or copy something else, you replace the Clipboard's contents with something new.

 

SYNCHRONIZING THE CLOCK AUTOMATICALLY

Windows XP automatically sets your computer's clock and keeps it set to the right time -- if you tell it to do so. Double-click the little clock in the bottom right corner of your computer, click the Internet Time tab, and click in the box that is labeled Automatically Synchronize With An Internet Time Server. After you're connected to the Internet, your computer checks the time and resets its clock accordingly.

 

CHANGING YOUR COMPUTER'S SETTINGS

The Settings tab of the Control Panel allows you to change the color quality of your monitor between Medium (16 bit) and Highest (32 bit) used by Windows XP, and select a new screen resolution (the higher the number of pixels, the smaller the items and fonts appear on the desktop, enabling Windows to display more stuff on-screen). You can also click the Advanced button to open a dialog box for your monitor in which you can tweak your computer monitor and screen adapter card settings. Click the Troubleshoot button to open a diagnostics screen in the Help and Support Services window that can suggest things to try if you're experiencing screen display problems.

To reach the Control Panel, click Start, Settings, Control Panel, Display. The settings tab is the last of five tabs, following Themes, Desktop, Screensaver, and Appearance.

 

REDUCING CLUTTER IN YOUR CONTACTS LIST

If you use Outlook Express as your default email program with Windows XP, it can be overly paternalistic. Case in point: Whenever you send a message to someone (even if it's a reply to a message that was sent to you), the person you send the message to is automatically added to your Contacts list.

More than that, if you add someone to your Windows Messenger Contacts list, and you open OE with Windows Messenger running, Outlook Express scarfs up the name and puts it in the Contacts list, too.

That might be well and good if OE had a way to identify and eliminate duplicates, or tell if you really wanted to keep a specific reply-to e-mail address. But it doesn't.

To tell OE that you don't want it to add names to your Contacts list automatically:

  1. Choose Tools, Options, Send.
  2. Uncheck the Automatically Put People I Reply to in My Address Book box.
  3. Click OK.

You probably want to go through your Address Book and get rid of the duplicates. Choose Tools, Address Book, and be braced for some hard work.

Any time you want to add someone who has sent you a message to your Contacts list, simply right-click the person's name at the top of the message (or in any list of messages, such as the Inbox or the Deleted Items list) and click Add to Address Book.

 

CONSIDERING THE CONTENT ADVISOR

It's no secret that the Internet is a bit dangerous, especially if you have kids. You can use the Content Advisor to limit the online locations that your computer can visit.

  1. With IE open, choose Tools, Internet Options.
  2. In the resulting Internet Options dialog box, click the Content tab to display it.
  3. Click the Enable button. (Note: If there is no Enable button but Disable and Settings buttons instead, Content Advisor is already enabled. Click the Settings button to see the options and make changes if you wish.)
  4. In the Content Advisor dialog box on the Ratings tab, click one of the four options: Language, Nudity, Sex, or Violence. Use the slider to set the site-screening level that's appropriate for you.
  5. Repeat Step 4 for each of the categories.
  6. Click the Approved Sites tab and enter the name of a specific site that you want to control access to. Then click either of the following options:

    Always: Allows users to view the site, even if it's included in the Content Advisor screening level you've set.

    Never: Means that nobody can visit the site even if it's acceptable to Content Advisor.

  7. When you finish making your settings, click OK twice to save them.

If you want to view sites that you don't want others to see, you can do that, too. On the General tab of the Content Advisor dialog box, make sure that the Supervisor Can Type a Password to Allow Viewers to View Restricted Content check box is selected, and then click Create Password. In the dialog box that appears, enter the password, confirm it, and then enter a hint and click OK. Now if you're logged on as the system administrator, you can get to any restricted site by using this password.

 

LOOKING FOR SPY COOKIES ON YOUR PC

Are you worried about spy cookies on your PC? Don't be overly concerned: Almost everybody has them, and if the spy cookie cow is already out of the barn, there isn't a whole lot you can do. How's that for a mixed metaphor?

If you want to see spy cookies on your machine:

  1. Choose Start, My Computer, and navigate to C:\Documents and Settings\username\ Cookies, where "username" is your user name.

    My C:\Documents and Settings\woody\Cookies folder has a lot of small text files -- my cookies.

  2. Look for files with the word ad, ads or advertising in the name. Open the ones that look suspicious.

Not all cookies are bad. But the bad ones -- spy cookies in particular -- can be very irritating. You can end up on spam lists. Your personal information could go to somebody you've never heard of. Your Web surfing habits could be tracked. Not good.

Beat this by installing a bad cookie catcher. The best is a product from Lavasoft called Ad-aware Standard Edition. It's free for noncommercial use. Just go to www.lavasoft.nu [ http://www.lavasoft.nu ] and in the Software category on the left, click Ad-aware. Then click Download. Follow the instructions to download a copy of Ad-aware Standard.

When the installer is finished, double-click the Ad-aware icon that is automatically placed on the Window desktop. Immediately click Check for Updates Now, then click Connect, and then click Scan Now.

From here, before you proceed with a scan, click the Settings button (the one that looks like a gear, at the top of the page). Ad-aware offers to let you change the settings. In general, Lavasoft recommend that you not run Ad-aware automatically when Windows starts.

 

CHANGING THE CURSOR

If you think the default cursor is boring (or difficult to see), Windows gives you the option of changing it. Just be careful not to change it to another standard cursor (for example, changing the Normal Select cursor to the Busy hourglass cursor). This could prove slightly confusing for you and completely baffling to anybody else who works on your computer. If you make a choice and decide it was a mistake, click the Use Default button on the Pointers tab in the Mouse Properties dialog box to return a selected cursor to its default choice.

To change the cursor:

  1. Choose Start, Control Panel and double-click the Mouse link.
  2. Click the Pointers tab in the Mouse Properties dialog box. Whatever theme you have displayed in Windows is the one that will be selected here with its cursors displayed. To change to cursors used in other themes, select a theme from the Scheme drop-down list.
  3. Click the Normal Select (or any other) cursor in the Customize list, and then click the Browse button.
  4. In the resulting Browse dialog box, click the Views button and choose Thumbnails.
  5. Click a cursor file icon and then click Open.
  6. Click Apply to see whether you're happy with your cursor choice, and when you are, click OK to exit.

 

SECURING YOUR DATA

The buzz about security these days is all about the Internet. Everyone is worried about all the nefarious programs that can be delivered right to your system via the Internet. Problem is, the Internet is not your biggest security problem. The biggest threat you face is to your local machine -- security issues would exist even if you unplugged the network cable that leads to the Internet.

This is not to say that you shouldn't pay attention to Internet-related security; you should. You just need to be aware that if you don't make your system secure from non-Internet-related threats, you're missing the most likely source of security problems.

Consider these, as examples:

  • Data loss. You have hundreds, if not thousands, of hours invested in the data on your system. The old adage is true: Time is money. So the time you spend amassing your data represents a huge investment. Losing data is a huge security risk. If you run a small business and lose your data, your business could be severely damaged.

    The more your investment is worth, the more important it is to back up data. Minimize the chances of damage by periodically doing backups.

  • Data recovery. When you delete information from your hard drive, Windows marks as free the hard drive locations previously occupied by the data. This means the locations are once again available to store information. Notice that Windows only marks the locations as available; it doesn't actually delete data. That's right -- the data previously stored on the hard drive is still there, until it's overwritten by new data. With the right tools, the data in these deleted locations can even be recovered and viewed.

    The accessibility poses a security threat if someone starts using your system. To avoid this problem, many disk utilities include programs that completely erase data by overwriting it with new data and then deleting it. System Mechanic [ http://www.iolo.com/ ] includes a program called Drive Scrubber, and McAfee's QuickClean [ http://www.mcafee.com/ ] includes a program called Digital Shredder. Either program -- or their counterparts from other system utilities -- helps ensure the security of deleted data.

If you give your system away or sell it to someone else, they can use software to access your deleted data. Make sure you use a secure deletion program like Drive Scrubber or Digital Shredder to remove all traces of your data before the old system leaves your hands.

 

DON'T FORGET TO DEFRAG

When writing information to your hard disk, Windows isn't the most careful shelf stocker. It often breaks files into pieces, stuffing them into different nooks and crannies. When rummaging around for all the parts, Windows subsequently takes longer to retrieve the files.

To fix the problem, choose the Control Panel's Performance and Maintenance category and select Rearrange Items on Your Hard Disk to Make Programs Run Faster.

When the Disk Defragmenter window appears, click the Analyze button. Windows inspects your computer's hard drive and reports back. If it says your hard drive doesn't need defragmentation, click the Close button, close the program, and move on. But if it says you should defragment, click the Defragment button.

The Disk Defragmenter does its job in the background as you work, sometimes finishing in a few minutes, other times working through the evening. When it's finished, your computer runs more quickly when opening and closing files.

  • Run the Disk Defragmenter once a month or so, especially if your computer seems to be running slowly or you can hear your hard drive making frantic rummaging noises.
  • For a shortcut to the Disk Defragmenter, call up My Computer from the Start menu, right-click on your hard drive, and choose Properties. Then click the Tools tab and click the Defragment Now button.
  • Note that if, for some reason, you can't find the Disk Defragmenter in your list of options, you can always search for "defrag" and the program will show itself.

 

UNDELETING A FILE

Sooner or later, your finger will push the Delete key at the wrong time, and you'll delete the wrong file. A slip of the finger, the wrong nudge of a mouse, or, if you're in southern California, a small earthquake at the wrong time can make a file disappear. Zap!

Scream! When the tremors subside, double-click the Recycle Bin, and the Recycle Bin box drops down from the heavens.

The files listed in the Recycle Bin can be brought back to life simply by dragging them out of the Recycle Bin box: Use the mouse to point at the name of the file you want to retrieve and, while holding down the mouse button, point at the desktop. Then let go of the mouse. Windows moves the once-deleted file out of the Recycle Bin and places the newly revived file onto your desktop.

  • After the file's on your desktop, it's as good as new. Feel free to store it in any other folder for safekeeping. Want to return it to its original location? Don't drag it from the Recycle Bin. Instead, right-click on it and choose R[e]store.
  • Don't expect to find programs deleted from your floppy disks or computer networks. (You can find other programs for undeleting files from disks at the software store, fortunately.)
  • The Recycle Bin normally holds about 10 percent of your hard disk's space. For example, if your hard drive is 8GB, the Recycle Bin holds onto 800MB of deleted files. When it reaches that limit, it starts deleting the oldest files to make room for the incoming deleted files. (And the old ones are gone for good, too.)

 

SEEING MORE INFORMATION ABOUT FILES AND FOLDERS

Whenever you create a file or folder, Windows scrawls a bunch of secret hidden information on it: its size, the date you created it, and even more trivial stuff. Sometimes it even lets you add your own secret information: lyrics and reviews for your music files and folders, or thumbnail pictures for any of your folders.

To see what Windows is calling your files and folders behind your back, right-click on the item and choose Properties from the pop-up menu. Choosing Properties on a Jimi Hendrix song, for instance, brings up bunches of details.

Click the General tab and Windows shows that the Jimi Hendrix song is an MP3 audio file of the song "Hey Joe." The song is 3.27 MB in size, and it opens with Windows Media Player. (If you want a different MP3 player to play the song, click the Change button to select a different player.)

Click the Summary tab and click the Advanced button for the real fun. Windows displays the song's ID Tag information: the Artist, Album Title, Year, Track Number, Genre, Duration, and technical information.

Windows lets you see more information about files as they sit in a folder, too. Choose Details from a folder's View menu. Instead of just displaying icons, Windows displays detailed information about your files.

Folders usually display files sorted alphabetically. To sort them differently, right-click inside the folder and click the Arrange Icons By menu. Choose Sort by Size to place the largest files at the list's top. The Sort by Type option groups together files created by the same program. Choose Sort by Date to keep your most recent files at the list's top.

When the excitement of the Arrange Icons By menu wears off, try clicking the little buttons at the top of each sorted column. Click the Size button, for instance, to quickly place the largest files at the list's top. Click the Date button to quickly sort by date, instead.

 

DISPLAYING THE TRADITIONAL DESKTOP ICONS

Older versions of Windows had a few icons that always appeared on the desktop:

  • My Documents
  • My Computer
  • My Network Places
  • Internet Explorer
  • Recycle Bin

Of these five, only the Recycle Bin appears on the Windows XP desktop by default. If you want to display any of the other icons, follow these steps:

  1. Right-click anywhere on the desktop. Make sure you right-click the desktop itself, not on an object lying on the desktop. Windows displays a context menu.
  2. Choose Properties. The Display Properties dialog box springs into view.
  3. On the Desktop tab, click the Customize Desktop button. Windows displays the Desktop Items dialog box with the General tab selected.
  4. At the top of the dialog box, select the check boxes corresponding to the icons you want displayed on the desktop. Conversely, you can deselect the check boxes of any icons you don't want displayed.
  5. Keep clicking OK to dismiss all the dialog boxes onscreen.

The icons you selected should be visible onscreen, along with all the others you have.

 

CHECKING A HARD DISK FOR ERRORS

Today's hard drives rarely have errors, so you probably don't need to check for any. But if you think your hard drive's acting strangely, and defragmenting it doesn't fix the problem, tell Windows XP to check it for errors. Open My Computer, right-click on your hard drive, and choose Properties. Click the Tools tab and click the Check Now button. (Leave the two options blank.)

Click the Start button, and you hear your hard drive whirring away as Windows probes it for problems. If it finds any, follow the Windows instructions for making repair attempts. Also start saving your cash and backing up your data -- repeated errors mean your hard drive may be on its last legs.

 

IDENTIFYING DISK DRIVES

Windows needs a means of identifying the computers on a home network so that it can specify the exact location of files on the network. On your computer, Windows 98 uses the drive letter, a colon, and a backslash to identify the drive where files can be found. This approach isn't practical on the network because there would be no way to discern whether C:\ referred to drive C on your local PC or to drive C on one of the other computers on your network. To remedy this problem, Windows uses Universal Naming Conventions (UNC) to designate computers that are on the network. For example, if a computer is named Brian, on the network that computer would be referred to as \\Brian.

 

THINKING ABOUT AN EXTERNAL HARD DRIVE

In the old days, hard drives were large and couldn't fit into the computer case. Many hard drives were external, out of necessity. Then drives started getting compact, and storing them inside the computer case became the norm. With the advent of FireWire and USB 2.0, drives are crawling back out of the computer case. External drives can be found on any computer retailer's shelves. The price for an external drive ranges from $150 to $400, depending on its capacity.

The interest in external drives is driven by two primary reasons: easy backups and easy data transfer.

As the amount of data on a typical PC gets larger, the ease of doing backups -- even on CDs -- gets harder. CDs can handle just over 600MB of data, but most hard drives are now at 40GB or more. That's a lot of CDs to use for backup!

An easier and faster solution is to use an external hard drive. Plug it in -- normally via a USB or FireWire cable -- and Windows XP recognizes it as just another hard drive. You can copy your files to the hard drive, unplug it, and store it in a safe place. The process is much faster than using either CD or DVD solutions.

Recognizing that external hard drives are being used for backups, Maxtor recently came out with a line of external drives geared toward doing them. The drives have a capacity of anywhere from 160GB to 350GB. (That's a lot of data.) The drive enclosure even has a button that can be programmed to do the backup for you. Plug in the drive, push the button, and the backup automatically occurs. Pretty cool!

Regarding data transfer, suppose that you work part time at an office and the rest of the time at a client's location -- or even at home. If you work on the same projects in both places, synchronizing data between locations quickly becomes a big chore.

The solution is an external drive. If you store your data on the external drive, you can take it with you and plug it into all the systems. When you do, the data is immediately available and ready to use.

 

SAVING YOUR HARD DRIVE

It's not impossible to recover data from a crashed hard disk. But the process requires a clean room and highly specialized skills. In other words, it's darn expensive. Furthermore, there's no way of knowing in advance just how much data, if any, can be recovered from the drive. So you may have to shell out a good deal of money to recover little, or nothing, of any real value. Still, sometimes that's a chance you'll just have to take.

Data recovery services, as they're called, are few and far between and not always easy to find. Your best bet is to use your favorite search engine on the Web to search for the phrase data recovery. If you can't find one locally, you'll need to remove the hard drive from your system and ship it to the service center.

Bonus tip: If you work in a company with an Information Systems department, then become good buddies with a few of the techs. They may be able to help you with any personal computer emergencies that may crop up.

 

FREEING UP SPACE ON A HARD DRIVE

Sooner or later, Windows XP will start sending messages complaining about running out of room on your hard disk. Of course, you could always install a larger hard drive. But there's a solution that's less drastic: Use the Free Up Space on My Hard Disk task that pops up when you choose the Control Panel's Performance and Maintenance category.

Or call up My Computer from the Start menu, right-click on your hard drive, and choose Properties. Click the Disk Cleanup button, and Windows calculates how much garbage it can delete.

Make sure you select Downloaded Program Files (if any), Temporary Internet Files, Recycle Bin, and Temporary Files. Click OK and then click Yes when Windows asks whether you're sure. Windows erases the files, freeing space in the process.

 

FIDDLING WITH DRIVERS

Windows comes with drivers needed to install almost anything you want to attach to your computer. However, sometimes you want to install something that's either too new for Windows XP to know about or too old for it to remember. In that case, it's up to you to track down and install a Windows XP driver for that part. The driver is simply a piece of software that lets Windows communicate with the part.

The best drivers come with an installation program that automatically places the software in the right place. The worst drivers leave all the grunt work up to you.

If Windows XP doesn't automatically recognize and install your newly attached piece of hardware after it's turned on, follow these steps to locate and install a new driver:

  1. Visit the part manufacturer's Web site and download the latest Windows XP driver.
  2. You often find the manufacturer's Web site stamped somewhere on the part's box. If you can't find it, try searching for the part manufacturer's name on Google and locate its Web site.
  3. Look in the Web site's Support or Customer Service area. There, you usually need to enter your part, its model number, and your computer's operating system (Windows XP) before the Web site coughs up the driver.
  4. No Windows XP driver listed? Try downloading a Windows 2000 driver instead because they sometimes work just as well. (Be sure to scan any downloaded file with a virus checker.)
  5. Run the driver's installation program.
  6. Sometimes clicking your downloaded file makes its installation program jump into action, installing the driver for you. If so, you're through. If not, head to Step 3.
  7. If the downloaded file has a little zipper on the icon, right-click on it and choose Extract All to unzip its contents into a folder. Remember the folder's name and location on your computer because you need it in a later step.
  8. Choose Printers and Other Hardware from the Control Panel.
  9. Choose the words Add Hardware from the top of the window's left side.
  10. The Add Hardware Wizard guides you through the steps of installing your new hardware and, if necessary, installing your new driver.
  • Keep your drivers up-to-date. Even the ones packaged in a new part's box are usually old. Visit the manufacturer's Web site and download the latest driver. Chances are, it fixes problems earlier users had with the driver packaged in the box.
  • Problems with the new driver? Right-click on My Computer on the Start menu and choose Manage. Double-click Device Manager and double-click your part's name on the window's right side. Click the Driver tab and click the Roll Back Driver button. Windows XP reinstalls the previous driver.

 

WHICH FOLDER SHOULD I USE FOR MY SCANNED DOCUMENTS?

You can select the folder on your computer where you want to store your scanned document.

To determine which folder you want to use, take a look at the following options:

  • My Pictures: If you want to be able to quickly access the scanned document in the future, store the document in the My Pictures folder.
  • Subfolder within My Pictures: To keep the scanned document separate from other pictures in the My Pictures folder, store the document in a subfolder within the My Pictures folder. To name the subfolder memorably, you can select the name you gave the scanned document.
  • Shared Pictures: If you want other users set up on your computer to be able to access the scanned document, store the document in the Shared Pictures folder. The Shared Pictures folder is stored in the Shared Documents folder on your computer.

 

SHOWING RECENT DOCUMENTS

Some people love the recent documents feature. Most people hate it. That's why Microsoft turned it off in the final, shipping version of Windows XP/Home. Heaven only knows why it's present in Windows XP/Pro.

In most normal circumstances — with well-behaved programs that don't crash — Windows keeps track of which documents you've opened. You can have Windows show a list of those documents on the Start menu, just under My Documents.

Folks who like the feature appreciate being able to retrieve documents quickly and easily, without spelunking for the program that created them: Click a Word document in the My Recent Documents folder, and Word comes to life, with the document open and ready to rumble.

Folks who hate the feature would just as soon open the application and use the application's most recently opened file list (typically on the File menu) to retrieve their documents. Some don't particularly want to leave (yet another) record of what they've been doing lying around for prying eyes.

Follow these steps if you want to turn on My Recent Documents:

  1. Right-click Start and click Properties.
  2. On the Start Menu tab, make sure that the Start Menu check box is selected, and then click the Customize button.
  3. On the Advanced tab, select the List My Most Recently Opened Documents check box.

Note that you can return to this location to clear out the list. But clearing the list here does not clear similar lists in your applications, such as Word or Internet Explorer. For those, you have to refer to the application itself.

 

WHERE, OH WHERE, ARE MY DOCUMENTS?

If you're accustomed to earlier versions of Windows, you may be surprised to discover that your My Documents folder in Windows XP is no longer in the root folder of the C: drive, where it used to be. The My Documents folder is actually now under C:\Documents and Settings\yourusername. This little change is so transparent, and so well hidden, that you may not even discover it for quite a while after upgrading to XP.

The reason for the change has to do with the improved support for multiple users in Windows XP. Each user has his or her own folder within the Documents and Settings folder. That folder, in turn, contains Cookies, Desktop settings, Favorites, a My Documents folder, and more, for each user. Exactly which of those folders actually comes into play while Windows is running is determined by the user's name.

 

TOO MANY FEATURES TO LIST

Windows XP Home Edition, specifically designed for homes and small businesses, offers many new features including an easier-to-use Start menu, enhanced help and support, an integrated Windows Update with the Help and Support Center, DVD playback, native CD burning, an Internet Connection Firewall, the option to remotely disconnect your dial-up connection, and more. Check out Microsoft's Windows XP Home Edition Features [http://www.microsoft.com/windowsxp/home/evaluation/features.asp] for a rundown on this new version of Windows.

 

INSTALLING THE FIREWALL

Firewall software sits between your computer and the Internet, acting as a door -- letting you decide what software can access your computer, and when. Windows XP comes with a built-in firewall.

To install it, follow these steps:

  1. Open the Start menu, right-click on My Network Places, and choose Properties.

    The Internet is a huge network -- it's designed for computers to talk to each other. That's why it's important to make sure that only the friendly computers do the talking.

  2. Right-click on the connection you want to protect, and choose Properties.

    If you're using a dial-up account, for instance, right-click on that icon. If you're using a network in your home or office, right-click on the Local Area Connection. Either way, choose Properties.

  3. Click the Advanced tab and activate the firewall.

    Click the box to activate the Windows XP firewall.

    If you're running a network and using the Internet Connection Sharing to let all the networked computers share the modem, the firewall should only be activated on the host computer -- the computer that's actually connected to the Internet. It doesn't need to be activated on the client computers -- the computers that share the host computer's modem.

 

YOUR FRIEND, THE FLATBED

A flatbed scanner has a top that lifts up, just like a copy machine. The sensor head moves in a flatbed scanner while the material that you're scanning remains motionless on top of the scanning glass. Comparatively, with a sheetfed scanner, the material that you're scanning moves through a system of rollers while the sensor remains stationary. Printer manufacturers typically use sheetfed scanning hardware in all-in-one or multifunction devices, which combine the functionality of a printer, a scanner, a fax machine, and a copy machine in one svelte case. Sheetfed scanners aren't recommended, though -- despite the fact that they take up far less space.

But here are the top three reasons why you should pick a flatbed scanner:

  • They deliver a better quality scan: Because the original material remains fixed in a flatbed (compared with the moving original in a sheetfed), you have less chance of shifting, allowing a flatbed to deliver a better scan with more detail.
  • They're versatile: If an original can fit on top of the flatbed's glass, you can scan it -- pages from a book, very small items such as business cards, or even items such as clothing. With a sheetfed scanner, you're limited to paper documents, and you have to use a clear plastic sleeve to hold those business cards. (Many sheetfed scanners won't accept small items at all.)
  • They have fewer moving parts: Sheetfed scanners can easily jam if the original document doesn't feed correctly -- they're generally less reliable over the long run than flatbed models because sheetfed scanners require more cleaning and adjustment.

If you've already invested in a sheetfed model, don't despair; there's no reason to scrap your hardware. However, you'll have to limit yourself somewhat in your material . . . unless, of course, you don't mind cutting pages out of books and magazines to scan them.

Here are other specialized types of scanners:

  • Negative scanners: These expensive models are especially designed to produce the best possible scans from film negatives. They do nothing else, so versatility isn't their claim to fame.
  • Business card scanners: Again, the name says it all. These portable scanners capture images and information from standard-size business cards. They're often used in conjunction with laptop computers or palmtop computers.
  • Pen: A pen scanner captures only a single line of text at once, but they're easy to carry around and can be used with a laptop computer and OCR software to read text from documents into a word processing application.

 

MAKING A FOLDER PRIVATE

You can only make your own My Documents folder Private. That's true for all users, all the time, even on a PC that's not connected to a network, and it doesn't matter how many accounts are on the PC. You can't do it to any other folder; nobody else with an Administrator account can do it to you. After you make your My Documents folder Private, you can't make any subfolders "un"private. It's an all-or-nothing deal.

If you make My Documents Private, you'd better put a password on your account. Otherwise, anybody who walks up to the machine can get into the folder.

The minute you put a password on your account, you need to make a password reset disk so that you can retrieve this private data if you ever forget your password. (Worry not, this will be the subject of next week's tip!)

To make My Documents Private, follow these steps:

  1. Choose Start, My Documents. Explorer takes you into the My Documents folder.
  2. On the Standard toolbar, click the up arrow. Explorer takes you up one level so you can see the My Documents folder.
  3. Right-click the My Documents folder and choose Properties. You see the My Documents Properties dialog box.
  4. Click the Sharing tab. Windows shows you the Sharing settings.
  5. Check the Make This Folder Private box and click OK. Windows encrypts all the data in My Documents. That can take a long time. When it's done, Windows returns to the My Documents Properties dialog box.
  6. Click OK to clear the My Documents Properties dialog box.

If you have an Administrator account and you add a password to it by using the Control Panel's User Accounts dialog box, you're asked if you want to make your My Documents folder Private. It's the same setting as the Make This Folder Private setting.

 

USING E-MAIL FOLDERS EFFECTIVELY

Most, if not all, e-mail clients allow you to use folders to organize your e-mail. In fact, folders are a great boon to keeping your incoming e-mail uncluttered and under control.

Don't confuse e-mail folders with file folders on your disk drive. Conceptually, they're similar to each other only in that each allows you to organize information. While some e-mail clients may use file folders to store your e-mail, many do not. The folders are maintained within the client as a logical structure, with no relation to file folders on the hard drive.

Rather than leaving all your e-mail in your inbox, give some thought to how you can organize it using folders. For instance, you could have a folder for your work-related e-mail or a folder for each project you're working on. You could also create folders for family e-mail, hobbies, and other categories.

You can configure most (if not all) e-mail clients to display available folders onscreen. The folders in Outlook are part of the Navigation pane. When displayed, the pane is at the left side of the program window.

The Navigation pane (or its equivalent) is helpful when working with folders. You can easily drag messages from one folder and drop them in another or move entire folders. To create an e-mail folder, simply right-click an existing folder and choose New Folder. Name the folder and start using it to store messages.

 

MAKING ALL FOLDERS BEHAVE THE SAME WAY

It can take days - even weeks - to adjust folders so that they open up showing just the view you like: all large icons arranged by name, for example, or a more detailed view spilling over with information about the file.

  1. From the View menu, choose Folder Options. The Folder Options window appears, ready for you to change the looks of your folders.
  2. Click on the View tab, and then click on the Like Current Folder button. It's a big and clunky button; you can't miss it.

If things don't work out - you don't like that current folder after all - return to the Folder Options window and choose the Reset All Folders button.

 

PERFORMING TASKS WITH YOUR PERSONAL FOLDERS

The My Pictures and My Music folders offer several specialized options that you can select to work with your pictures and music. Here are some tasks you can perform.

  • My Pictures:
    • View as a slide show. Displays all the pictures in the My Pictures folder as a full-screen slide show.
    • Order prints online. Sends the pictures you select to a Web site that allows you to order prints of the pictures.
  • My Music:
    • Play all. Plays all the music in the My Music folder.
    • Shop for music online. Displays the WindowsMedia.com Web site, which allows you to listen to and purchase music.

 

VIEWING YOUR COMPUTER'S FONTS

Sure, you see the names of the fonts in your word-processing program. But how can you tell what they look like before choosing one? To find out, choose the Control Panel's Fonts icon.

From there, you see what fonts come with Windows Me, you install additional fonts, and you delete the ugly ones you don't like anymore.

To be on the safe side, don't delete any fonts that come with Windows Me; only delete fonts that you've installed yourself. Windows programs often borrow Windows Me fonts for menus. If you delete those fonts, your menus mysteriously vanish. And for goodness sake, don't delete any fonts beginning with the letters MS. (Don't delete the fonts that have red lettering in their icons, either.)

Double-click any font icon to see what that particular font looks like. For example, if you double-click the icon marked Impact font, Windows Me brings up an eye chart displaying how that font would look on the printed page. (Click the Print button to see what it really looks like on the printed page.)

  • Icons marked with the letters "TT" are TrueType fonts, so they'll always look better than the fonts marked with the letter "A."
  • Note: You'll probably never need to fiddle with the Fonts icon. Just know that it's there in case you ever want to view your fonts.

 

WHAT TO DO WHEN YOUR COMPUTER FREEZES UP SOLID

Every once in a while, Windows just drops the ball and wanders off somewhere to sit under a tree. You're left looking at a computer that just looks back. Panicked clicks don't do anything. Pressing every key on the keyboard doesn't do anything - or worse yet, the computer starts to beep at every key press.

When nothing on-screen moves except the mouse pointer, the computer is frozen up solid. Try the following approaches, in the following order, to correct the problem:

  • Approach 1: Press Esc twice.

    This action usually doesn't work, but give it a shot anyway.

  • Approach 2: Press Ctrl, Alt, and Delete all at the same time.

    If you're lucky, Windows Task Manager appears with the message that you discovered an "unresponsive application." The Task Manager lists the names of currently running programs - including the one that's not responding. Click the name of the program that's causing the mess and then click the End Process button. You lose any unsaved work in it, of course, but you should be used to that. (If you somehow stumbled onto the Ctrl+Alt+Delete combination by accident, press Esc at the unresponsive-application message to return to Windows.)

    If that still doesn't do the trick, try clicking the Task Manager's Shut Down menu and choosing Restart. Your computer should shut down and restart, hopefully returning in a better mood.

  • Approach 3: If the preceding approaches don't work, push the computer's reset button.

    When the Turn Off Computer box appears, choose Restart.

  • Approach 4: If not even the reset button works, turn the computer off and choose Restart from the Turn Off Computer box.

 

GUEST ACCOUNTS

If you have several other people using your computer and you don't want to set up separate user accounts for each of them, you can set up a standard Guest account, with its own set of limited user privileges. A guest can run programs and such, but cannot make changes to the system.

To turn on or off the Guest account, choose Start, Control Panel, User Accounts. Then click the Guest account picture in the User Accounts window. You'll be taken to a page that enables you to turn the account on or off.

 

NO HARD-DRIVE SPACE TO BURN A CD?

Burning a CD in Windows XP takes a lot of room on your hard drive because Windows Media Player 9 (WMP9) has to convert the songs into a format that works on audio CDs. If you don't have an extra 700 to 800MB of free space on your main hard drive to accommodate the process, here's how to get it.

Click Start, My Computer, right-click your CD-R drive, and click Properties, Recording. The CD Drive Properties dialog box appears. Change the drive where Windows can store an "image." This space on the new drive is used only temporarily. It has to be on a hard drive, because the CD burning process can't be interrupted. If you have to copy a bunch of files to another computer on your network, or even compress some files to make room for the temporary image area, go ahead. You can always move them back later. Oh. And while the recording session is under way, don't edit that home movie or print 200 vacation pictures, okay? The CD burning routine needs a little room.

 

THE DIFFERENCE BETWEEN A SHORTCUT AND AN ICON

An icon for a file, folder, or program looks pretty much like a shortcut, except that the shortcut has an arrow wedged in its lower reaches. And double-clicking on a shortcut does pretty much the same thing as double-clicking on an icon: starts a program or loads a file or folder.

But a shortcut is only a servant of sorts. After you double-click on the shortcut, it runs over to the program, file, or folder that the shortcut represents and kickstarts that program, file, or folder into action.

You could do the same thing yourself by rummaging through your computer's folders, finding the program, file, or folder you're after, and personally double-clicking on its icon to bring it to life. But creating a shortcut so that you don't have to rummage so much is often more convenient.

  • If you delete a shortcut -- the icon with the little arrow -- you're not doing any real harm. You're just firing the servant that fetched things for you, probably creating more work for yourself in the process.
  • If you accidentally delete a shortcut, you can pull it out of the Recycle Bin, just like anything else that's deleted in Windows.

 

ICONS TO AVOID

You probably won't come across these icons unless you've chosen the Windows XP Control Panel's lay-the-cards-on-the-table approach: the Classic View. But if you come across these icons, here's why you shouldn't click them.

Administrative Tools: This icon's a definite no-no. There's nothing here unless you're taking advanced computer classes. This icon is meant for technicians.

Scheduled Tasks: Don't fiddle around in here unless you can't possibly avoid it. Windows XP can perform some tasks automatically in the background, and it lists its scheduled tasks here. They're mostly maintenance jobs that don't need changing.

Speech: Click the Speech icon to hear Microsoft Sam read the text on your screen. Turn him off quickly when you hear how awful he sounds.

 

CLEANING UP OLD ICONS

Your desktop is a great place to park things for short periods of time, but a lousy place for organizing anything long-term. Start by cleaning up the mess that's there right now.

  1. Right-click an empty location on the desktop and click Properties, Desktop.
  2. Click Customize Desktop.
  3. Click Clean Desktop Now.
  4. Click Next. The Desktop Cleanup Wizard scans only for shortcuts. It doesn't even look at other kinds of files or folders (or zipped/compressed folders). Follow this procedure all the way to the end to move all your unused, or rarely used, desktop items. The Desktop Cleanup Wizard presents the results of its scan.
  5. Review the shortcuts with check marks next to them, and feel free to check any shortcuts that you don't expect to use in the near future.
  6. Click Next, and then click Finish. All the shortcuts you checked are shuffled to a folder on the desktop called Unused Desktop Shortcuts.
  7. Click OK twice to clear out the dialog boxes.

 

KEEPING YOUR ICONS STRAIGHT

Don't be confused by a program's icon on your desktop and a program's button on the taskbar along the bottom of your screen. They're two different things. The button at the bottom of the screen stands for a program that has already been loaded into the computer's memory. It's already running, ready for immediate action. The icon on your desktop or in Windows Me Explorer stands for a program that is sitting on the computer's hard disk waiting to be loaded.

If you mistakenly click the icon in the Windows Explorer or desktop rather than the button on the taskbar at the bottom of the screen, you load a second copy of that program. Two versions of the program are loaded: one running as a window, and the other running as a taskbar button waiting to be turned back into a window.

Running two versions can cause confusion -- especially if you start entering stuff into both versions of the same program. You won't know which window has the right version!

 

RUN, IE RUN!

In general, if you want IE to run faster, you need to get a faster Internet connection. But if you're stuck with a slow connection, and you're a bit desperate, there's one trick that will speed up IE -- but at a price. You can turn off graphics. When you tell IE to load a page without the graphics, the browser displays an empty box where the image would be. That's a bit like going to the Louvre and seeing only empty picture frames, but if you want to get through quickly, it may help.

Here's how:

  1. Choose Tools, Internet Options. The Internet Options dialog box opens.
  2. Click the Advanced tab.
  3. Scroll down to the Multimedia section and deselect the Show Pictures check box.
  4. Click OK to close the dialog box.

 

BEFORE YOU CREATE THAT WORD INDEX...

Except for the table of contents, the only way to find information in a long document is to look in the index. User manuals, reference works, and reports that readers will refer to all require indexes -- and a good index is a thing of beauty.

An index entry can be formatted in many ways. You can cross-reference index entries, list a page range in an index entry, and break out an index entry into subentries and sub-subentries.

Writing a good index entry is as hard as writing good, descriptive headings. As you enter index entries in your document, ask yourself how you would look up information in the index if you were reading it, and enter your index entries accordingly.

 

FINDING SNIPPETS OF STORED INFORMATION

Remember how much your husband loved that wine you had on your anniversary? So you stealthily typed the wine's name into your computer, but at Christmastime, you don't remember the name of the file where you saved the wine's name. You don't remember the date you created the file, or even the folder where you stashed it. All you remember is describing the wine's biting bouquet as "an alligator snap from behind a barge."

Luckily, that description is all Windows Me needs in order to find your file. Click the Start button and choose For Files or Folders from the Search menu. After the Search program pops up, click in the box marked Containing text, and type barge.

The Search program searches the computer, looking for files meeting your specifications.

  • Remember that CD-ROM discs take a long time to search. If you're listening to music or working from files you've stored on a disk, you can speed things up by telling the Find program to limit its search to hard disks. (Just popping the CD out of the drive is one way to keep the Find program from searching it.)
  • When searching for files containing certain words, type in the words least likely to turn up in other files. For example, the word barge is more unique than snap or behind; therefore, it's more likely to bring up the file you're searching for. And if barge doesn't work, try alligator.

 

WHAT'S AN INSTALLATION PROGRAM?

Installing a program can be a long, tortuous process. So programmers handled the chore the best way they could. They wrote a second program designed specifically to install the first program.

Known as installation programs, these programs handle the chores of copying the main program to the computer's innards and making sure that it gets along with Windows.

  • Most programs sold in software stores come with installation programs.
  • Some programmers are lazy, however, and don't write an installation program. As a result, they leave the installation chores squarely in your hands.
  • Many shareware programs and other programs downloaded from the Internet don't come with an installation program, so you have to tackle their installation yourself.

 

TURNING BACK ON THE SHORTCUT KEYS IN WINDOWS XP

Older versions of Windows had underlined letters in their menus. Instead of clicking the mouse on menu items, you could press Alt and the underlined letter to activate that menu item - a shortcut key, if you will. Although Windows XP leaves them out, here's how to turn them back on: Right-click the Desktop, choose Properties, and click the Appearance tab. Click the Effects button and remove the check mark from the line, Hide Underlined Letters for Keyboard Navigation Until I Press The Alt Key. The underlines all appear, ready for shortcuts.

 

REMOVING PREVIOUSLY TYPED WORDS FROM ONLINE DROP-DOWN LISTS

As soon as you begin to type something online -- a Web site address in Internet Explorer, for instance, or a name into an online form -- Windows XP often races in to help. It sends down a little box, listing items you've typed previously.

A quick point and click lets you retrieve a word or phrase from Windows XP's handy AutoComplete list, sparing you the effort of typing it in yet again.

Some people, however, don't like Windows XP looking over their shoulder as they type. And it's especially annoying when Windows XP keeps listing your typographical errors.

To delete a word or phrase from most AutoComplete drop-down lists, press the down-arrow key to highlight the entry and then press the Delete key. Unfortunately, this trick doesn't delete individual Web addresses you type into Internet Explorer. You must delete Internet Explorer's History to remove those.

To make Internet Explorer stop listing your previous entries, follow these steps:

  1. Open Internet Explorer and choose Internet Options from the Tools menu.
  2. Click the Content tab and click the AutoComplete button. The AutoComplete Settings dialog box opens.
  3. Click to remove check marks from Web Addresses, Forms, User Names and Passwords on Forms, and Prompt Me to Save Passwords.
  4. Click the Clear Forms button and the Clear Passwords button and then click OK. Those two final buttons delete previously stored AutoComplete entries.

It's convenient for Internet Explorer to store the passwords you use for your Web site. But that makes it convenient for anybody who sits at your computer to log on to password-protected sites. Even if you enjoy AutoComplete, consider removing the check mark from the User Names and Passwords on Forms box in Step 3.

 

PLAYING MEDIA FILES WITH ONE PLAYER

Each time you load a new media player on your machine, you must decide which player will handle each file format by default (that is, which player is called up automatically when a song is selected). This can get confusing when you're working with common file types, like MP3 or WMA. Unless you're careful when you set up a new player, it could take over the playback of all the media files, even if you want to keep certain files associated with your original player.

When you're setting up a new player, be careful to specify which player handles which file formats. You can always reset these preferences using your favorite media player. For example, in Windows Media Player, you can reset your options by following these steps:

  1. In Windows Media Player, select Tools, Options.
  2. Click the File Types tab.
  3. Select the file types you want to play with Windows Media Player. You can either make Windows Media Player the default player for everything or pick and choose what you want.
  4. Click the OK button to close the menu.

Your choices are finalized, and Windows Media Player handles only what you want it to.

 

ADDING SKINS TO MEDIA PLAYER

Today's generation wants to play with its toys. So, Microsoft added a whimsical feature to Media Player. The program normally rests on your desktop like a big wet towel, covering everything in its path.

Through skin technology, users can change that ugly wet towel into something much more hip. Skins are new interfaces for Media Player that make it less imposing and more friendly.

Here's how to put new clothes on Media Player:

  1. Click the Skin Chooser button. A list of skins appears on the left with the currently highlighted skin displayed on the right.
  2. Choose a skin from the list. More than a dozen skins await the dressing room. Try one on by clicking its name. The preview window shows the skin's appearance.

    To see even more skins, click the More Skins button near the top of the list. That whisks you off to the Microsoft Skins Gallery on the Internet - a collection of user-submitted skins up for the taking.

  3. Click the Apply Skin button.
  4. Located near the top of the list, this button dresses Media Player in your newly chosen skin and places it onto the desktop for evaluation.
  5. If you like your new selection, keep it. (And try to figure out the new placement of all the buttons.) If it's not quite up to snuff, repeat Steps 1 through 3.

Choose the Miniplayer skin when listening to music and still working on the computer. A nice small player, it fits into the background nicely. (Miniplayer won't play videos, though.)

 

KEEPING WINDOWS MEDIA PLAYER UP-TO-DATE

Windows Media Player is so tied into the Internet that it's likely to evolve more quickly than other components of Windows XP. To see what version of Media Player you have at the moment, launch Media Player and choose Help, About Windows Media Player. To check for updates, just choose Help, Check for Player Updates from the menu bar. You can also have Media Player automatically check for updates from time to time.

 

NEW WINDOWS XP MEMORY PROTECTION

Memory, of course, is where programs and data reside in your system. Some newer hardware systems allow memory to be protected by the operating system. Windows XP Service Pack 2 offers this protection -- it can mark different blocks of memory so that the computer itself knows whether they contain data or executable code.

This is a big deal because it prevents certain types of malicious intrusions into your system. Before, a Trojan program was potentially able to place itself into a data area of memory and then execute itself by modifying some code in your program. Now, if the Trojan program is placed in a memory area marked as "data only," it cannot be executed, and your system is protected.

 

STUCK IN MENU LAND

If your keystrokes don't appear in your work but instead make a bunch of menus shoot out from the top of the window, you're stuck in Menu Land. Somehow, you've pressed and released the Alt key, an innocent-looking key that's easy to hit accidentally.

When you press and release Alt, Windows turns its attention away from your work and toward the menus along the top of the window. To get back to work, press and release the Alt key again. Alternatively, press Esc. One or the other is your ticket out of Menu Land.

 

START MENU WOES

If you make any changes to the Start menu, Windows Me will no longer automatically sort the menu items. The menu will instead remain in the same order you left it in. You can drag and drop menu items into whatever order you prefer. If you would like Windows Me to re-sort the Start menu, just click the Start button and right-click on any item in the menu. Then choose Sort by Name from the context menu.

 

GETTING THE MESSAGE ABOUT WINDOWS MESSENGER

Why do so many people use Windows Messenger to type little messages back and forth to each other? Messenger fans cite several reasons:

  • It's free. Built in to Windows XP, Windows Messenger lets you communicate with other Windows Messengers users worldwide, with no long distance charges.
  • It's convenient. Speaking on the phone requires all your attention. Windows Messenger lets you keep working in the background, simultaneously holding multiple conversations while shuffling papers.
  • It's useful. In addition to exchanging text messages, users can send files and photos. Windows Messenger can take advantage of attached cameras and microphones to hold videoconferences with your friends.

Windows Messenger is far from problem-free, however. Its far-reaching features make it somewhat complicated to figure out for the first time. And although Yahoo! and AOL offer instant messaging software, they're not compatible: Windows Messenger can't send messages to AOL's Instant Messenger, for instance.

Also, because people can swap files easily, instant messaging software provides yet another roadway for traveling viruses. Many corporations ban them at work, fearing that employees are either revealing trade secrets or talking about last night's Desperate Housewives episode. Finally, instant message conversations aren't as secure as e-mail.

  • Windows Messenger and MSN Messenger are two different programs that do pretty much the same thing. Both Messenger programs can talk to each other. However, it's best to install one or the other, but not both. Uninstall MSN Messenger before using Windows Messenger.
  • Microsoft constantly releases new versions of Windows Messenger. To find out which version you're using, choose About from the program's Help menu. Compare that version number with the latest one available from Microsoft by using Windows Update, and download the newer one if necessary.

 

KILLING THE MESSENGER

Many people think of Windows Messenger as an intrusive time sink, only marginally more annoying than having a swarm of killer bees take up residence on a motherboard. Bosses hate it because somewhere between 70 and 99 percent of all the Windows Messenger traffic on business computers consists of vapid personal time-wasting conversations.

This is a perfect lead in to one of the most frequently asked questions about Windows XP: How do you get rid of Windows Messenger, completely, so that it doesn't start itself automatically, announce to the world at large when you're online, and start going garururump at the most annoying times?

Although it's true that you can turn off most of Windows Messenger's most annoying attributes by choosing Tools, Options and deselecting most of the check boxes on the Preferences tab, many people want to get rid of Windows Messenger completely.

While you can't get rid of Windows Messenger entirely -- Windows XP keeps vestiges of it around no matter how hard you try -- it's easy to take the program off your Start menu and basically drive a stake through its heart:

  1. Choose Start, Control Panel, Add or Remove Programs. Then click the icon marked Add/Remove Windows Components. You see the Windows Component Wizard.
  2. Deselect the Windows Messenger check box, and then click Next.
  3. When the wizard is done, click Finish. All visible evidence of Windows Messenger should be well and truly gone.

If you change your mind and want Windows Messenger back, follow the same three steps, but in Step 2, select the Windows Messenger check box.

 

RETRIEVING E-MAIL VIA WINDOWS MESSENGER

You can use Windows Messenger in conjunction with Hotmail to send and retrieve regular e-mail messages. By using your Hotmail mailbox, you can retrieve your e-mail messages from any computer that has Internet access.

To use Windows Messenger to send or retrieve e-mail through the Microsoft Hotmail service, click the More hyperlink in I Want To section of the Messenger window and then click Go to My E-mail Inbox on the pop-up menu. Doing this connects you to the Internet and opens the Inbox page for your Hotmail account on the MSN Hotmail Web site. You can then read your e-mail messages, reply to messages, and even compose new e-mail, using the buttons at the top of the page.

When you're logged onto Windows Messenger on your computer, Windows Messenger lets you know when new e-mail messages arrive in your Hotmail inbox by beeping at you and displaying a ScreenTip message (saying that you have new e-mail) above the Messenger icon on the Windows status bar.

 

GETTING STARTED WITH WINDOWS MESSENGER

Windows Messenger is a great way to keep up with people. But before you start flinging messages around the world, you'll have to sign up for a Microsoft .NET Passport. The easiest way is to sign up for a free Hotmail [http://www.hotmail.com/] account. Fill out the short questionnaire, and Microsoft assigns you a Hotmail e-mail address. Log in to Windows Messenger using that address, and you're set.

And here's a tip that you don't see every day: It's completely ethical to lie when filling out Microsoft's .NET Passport questionnaire. Your personal information is none of Microsoft's business. Let Microsoft fill its databases with information from credit card companies, like everybody else does.

 

STARTING WINDOWS MESSENGER

You can use Windows Messenger to see when your friends are online and exchange instant messages and files with them.

To start Windows Messenger:

  1. Click start to display the Start menu.
  2. Click All Programs to view a list of the programs on your computer.
  3. Click Windows Messenger.

    The Windows Messenger window appears.

    If you are already signed in to Windows Messenger, you do not need to perform steps 4 to 6.

  4. Click the [Click here to sign in] link.

    The .NET Messenger Service dialog box appears.

  5. Type your password. Make sure that you type the uppercase and lowercase letters exactly.
  6. Click OK to sign in.

    Note: If you are not currently connected to the Internet, a dialog box may appear, allowing you to connect.

    If you have added contacts to your list, contacts that are currently online and not online are displayed.

    New e-mail messages are indicated. If you have a Hotmail e-mail account, the number of new e-mail messages you have received is displayed.

 

MULTIPLE MONITORS

Plug a second video card into your computer, plug in a second monitor, and Windows XP will probably be able to spread its display across both monitors -- or even three, if you install yet another card and monitor.

It sounds kind of frivolous, but this new Windows XP feature can be kind of handy, actually. For example, you can run your Internet browser on one monitor while keeping your desktop handy for other work. Or you can spread your work out, making it easy to cut and paste between bunches of open windows.

A few words of caution, however: This two-monitor stuff is relatively new in the Windows world, so not all programs can handle it. Also, TV viewer cards can display TV shows only on the primary monitor -- your first monitor. The TV show simply disappears if you try dragging its window to the second monitor.

 

IT'S THE END OF THE MONTH ALREADY!

The months click by. You turn a page on the calendar. You reconcile your checkbook with the bank statement. You pay your mortgage or rent. You rake the gravel in your front yard (if you live in Arizona.) Add a few tasks to your monthly routine and your computer system will remain clean and tidy:

  • Clean up your desktop: The dreaded "icon creep" can result in more icons on your desktop today than there were a month ago. Identify the ones you don't need and delete them.
  • Archive project data: If you're a project-oriented type of person, you probably finished up a few projects this past month. Why not archive the data associated with those projects so that it no longer clutters your hard drive?
  • Eliminate spyware: Your pop-up blocker may suppress the symptoms of spyware, but the underlying problem - the spyware - may still be there. Spyware is notoriously hard to remove. Your anti-virus software may detect many of the spyware programs that vex you, but you should still run the free Spybot Search & Destroy [ http://www.safer-networking.org ] once a month.
  • Examine your startup files: Every time your computer starts, it automatically starts some programs. You may not know about this. If something changes the programs that run at startup, you may not know about the change, either. Unless, of course, you check to see what's running automatically. Check out your startup files once a month to make sure no surprises are lurking there.
  • Defragment your hard drive: One thing you really benefit from every month is defragmenting your hard drive. As you add, change, rearrange, and delete files, information stored on the hard drive can become discombobulated. Information is stored in bits and pieces here and there so that Windows has to grab data from all over your hard drive when you open a file. That slows down the system. You can knock things back into whack by defragmenting your hard drive, which essentially puts pieces of individual files back together. When done, Windows can more easily and quickly access your files.
  • Defragment your hard drive at the end of the day. You can leave the program running while you run home to decompress from the day.

 

MY MOUSE DOESN'T WORK RIGHT

Sometimes, the mouse doesn't work at all; other times, the mouse pointer hops across the screen like a flea. Here are a few things to look for:

  • If no mouse arrow is on the screen after you start Windows, make sure that the mouse's tail is plugged snugly into the computer's rump. Then exit and restart Windows.
  • If the mouse arrow is on-screen but won't move, Windows may be mistaking your brand of mouse for a different brand. You can make sure that Windows recognizes the correct type of mouse by following the steps on adding new hardware.
  • A mouse pointer can jump around on-screen if it's dirty. First, turn the mouse upside-down and clean off any visible dirt stuck to the bottom. Then twist the little round cover until the mouse ball pops out. Wipe off any crud and blow any dust out of the hole. Pull any stray hairs, dust, and goo off the little rollers and stick the ball back inside the mouse. If you wear wool sweaters (or have a cat that sleeps on the mouse pad), you may have to clean the ball every week or so.
  • If the mouse was working fine and now the buttons seem to be reversed, you've probably changed the right- or left-handed button configuration setting in the Control Panel. Double-click the Control Panel's Mouse icon and make sure that the configuration is set up to match your needs.

 

DIGITAL SNAPSHOTS OF MOVIES

In Movie Maker, you can take a snapshot of any frame of your video, in essence creating a digital photograph. You do this in the Record dialog box. But don't click the Record button to capture video; instead, you just need to play the tape until the frame you want to shoot appears in the Preview box. This is a little easier with a digital video camera, because you only need to get close to the frame. Then you can use the Previous Frame and Next Frame buttons in the Digital Video Camera Controls within the Record dialog box to zero in on the exact frame. After you have the frame you want, just click the Take Photo button. When you do, the Save Photo dialog box opens so that you can navigate to the spot where you want to save the photo.

 

MOVING AROUND IN A HURRY

The scroll bar, which looks like an elevator shaft, is along the edge of a window. Inside the shaft, a little freight elevator (the scroll box) travels up and down as you page through you work. In fact, by glancing at the little elevator, you can tell whether you're near the top of a document, the middle, or the bottom.

Want to move around in a hurry? Then put the mouse pointer on the little elevator box, hold down the mouse button, and drag the little elevator box up or down inside the shaft. For example, if you drag the box up toward the top of its shaft and release it, you can view the top of the document. Dragging it and releasing it down low takes you near the end. You can also use the up- and down-arrow keys (or the PgUp, PgDn) keys on your keyboard. Plus, to view the top of your document you can hold down Ctrl and press Home. To view the bottom of your document, hold down Ctrl and press End.

 

MAKING YOUR MULTIMEDIA EDITING PROGRAMS RUN FASTER

Everything these days is digital -- digital video cameras, digital still-shot cameras, digital audio recorders, digital mixers, and so on. All that digital equipment stores tons of information and can plug into your computer. Everyone wants to store, edit, play, and share all that digital information. New software is appearing all the time, promising the ability to slice and dice multimedia information 12 ways to Sunday.

The problem with having all that digital information on your computer, of course, is that the files created for digital multimedia are huge, huge, huge! Many things can affect the size of multimedia files, including quality, resolution, and audio or video speed. CD-quality audio can take 50KB of disk space per second. Video throws the storage needs through the roof: every second of video can require 6MB of file space. That is huge!

Say that you shoot two hours of digital video of your parents' 50th anniversary. You get everything -- the grand entrance, the arrival of the siblings, the arrival of your aunts and uncles, the arguments, the food fight. Hmmm... Let's see; that's 7,200 seconds, or anywhere from 36 to 44GB of data. Ack! Just for a single event!

As you can imagine, programs that allow you to fold, spindle, mutilate, and otherwise process such huge files can place quite the burden on your computer system. Top-notch programs push the envelope, trying to squeeze all the performance out of your system that they can.

The following points are the best two ways to speed up those programs:

  • Make sure you have lots and lots and lots of RAM in your computer. The more memory you can install, the better. If your motherboard can handle it, install 1GB or more of RAM. Windows XP can handle the added memory just fine, and the addition helps with editing Mom and Dad's anniversary party, so it doesn't show when Uncle Joe showed up with his walker and his surprise twentysomething bride.
  • Make sure you're using the fastest video card you can, along with a fast hard drive designed for multimedia use. Yes, they do make hard drives just for multimedia use. If you have one of these babies, you won't be sorry when it comes time to doing gymnastics with gigabytes of data.

 

ONE STOP SHOPPING FOR MUSIC

Click the [Shop for Music Online] hyperlink in the Music Tasks section of the My Music folder navigation pane to look for new albums and videos online. When you click this link, Windows connects you to the MSN WindowsMedia.com Web site. Once there, you can search for audio and video clips that you can download and play on Windows Media Player and you can purchase your favorite audio CDs.

 

WHAT'S IN A NAME?

Each filename in Windows consists of two parts: a main filename and a file extension. The file extension, which identifies the type of file and what program created it, consists of a maximum of three characters that are automatically assigned by the creating agent or program. Typically, these file extensions aren't displayed in the lists of filenames that you see.

Whereas the creating program normally assigns the file extension, Windows XP enables you to call the main part of the filename whatever the heck you want, up to a maximum of 255 characters (including spaces!). Keep in mind, however, that all pre-Windows 95 programs, and even some that run on Windows 98, don't support long filenames. These programs allow a maximum of only eight characters, with no spaces.

 

JOTTING DOWN NOTES WITH NOTEPAD

Use WordPad for letters that you want other people to see. Notepad works best for stuff you're going to keep for yourself. Like its name, it's designed for typing notes to save on the fly.

To nudge Notepad into life, choose All Programs from the Start menu, choose Accessories, and click on Notepad.

Unfortunately, Notepad tosses you into instant confusion: When you start typing, the sentences head right off the edge of the window and out of sight. To turn those single-line, runaway sentences into normal paragraphs, choose Word Wrap from the Format menu, as shown in Figure 5-12. Windows XP remembers your preference and wraps the lines to fit the page the next time you reach for Notepad.

Another warning: Unlike most word processors, Notepad doesn't print exactly what you see on-screen. Instead, it prints according to the margins you set in Page Setup from the Format menu. This quirk can lead to unpredictable results. Stick with WordPad for documents you want to print.

Turn Notepad into a logbook by typing .LOG as the first sentence of your file. Whenever you open that file, Notepad jumps to the bottom of the file and inserts the current time and date before you start typing.

 

PARTS REQUIRED BY WINDOWS XP

Microsoft touts the following parts as required in order to run Windows XP:

  • A Pentium 300 MHz microprocessor. (However, a faster computer, such as a Pentium III or Athlon running at 500 MHz means you'll spend less time waiting for Windows XP to do something exciting.)
  • 64 MB of memory (RAM). (Windows XP moves much more comfortably with 128MB. Bump that to 256MB or more if you plan to run programs like Microsoft Office and multimedia tools.)
  • 2GB of free hard disk space. (20GB of free hard disk space provides more space, or 40GB or larger will allow your computer to be useful for a long time.)
  • A 3 1/2-inch high-density disk drive. (Although the disk drive is not necessary, occasionally a Windows program still comes packaged on high-density, 3 1/2-inch floppy disks. Plus, floppy disks are a handy way to move your files to other computers.)
  • Color SVGA card. (To view videos, look for these qualifications: 32MB or more of memory, AGP support, motion compensation support for DVD playback, and support for DVI, S-Video, and composite video output.)
  • 12x or faster CD-ROM or DVD drive. (Either drive will install Windows XP.)
  • Internet access. (A 56K modem or faster allows for less time you'll spend twiddling your thumbs.)
  • Any PS/2-compatible mouse.
  • A 15-inch monitor or larger. (Although expensive, you may want a larger monitor such as an LCD monitor. The bigger your monitor, the bigger your desktop: Your windows won't overlap so much.)

 

OTHER COMPUTER PARTS YOU'LL PROBABLY NEED

In order for Windows XP to reach its full capacity, you may want to invest in additional computer parts.

For instance, in order to hear anything from your computer, you need a sound card and amplified stereo speakers with a subwoofer. (If you choose USB speakers, your computer needs USB ports.)

If you plan on connecting several computers with a network so they can share files, printers, and a modem you'll need a network adapter card for each computer, as well as their corresponding cables.

To watch TV on your monitor, you need a compatible TV tuner card. (Check your cable TV connection, too. Most TV tuner cards don't pick up much without cable TV.)

If you plan on watching DVDs, then you'll need your own DVD-playing software before Windows XP's Media Player will be able to show the DVDs.

To dump pictures from your digital video camcorder into Windows XP's Movie Maker, you need an IEEE 1394 (FireWire) port.

 

PICKING YOUR PASSWORDS

Passwords are the cloak-and-dagger part of the network business because keeping out unauthorized folk is a security focus for most institutions. Passwords are also the bane of both network users and administrators, and here's why.

The administrator wants you, the user, to change your password frequently in case other people discover it and use it, to refrain from writing it down, and to choose something that's hard for other people to guess. On the other hand, you, the user, want an easy-to-remember password that never has to be changed. Those two different goals can create a slight conflict, but not one that's impossible to deal with.

A good password is

  • At least six characters long
  • A mix of lowercase and uppercase characters, with at least one non-alphabetic character

Bad passwords are

  • Your name or initials
  • Names or initials of family members
  • Your dog's name or initials
  • Your birth date or the birth date of a family member
  • A variation on your username
  • Your phone number or phone numbers of friends or family
  • Popular obscenities - even when spelled backwards.

One good method is to turn a catch phrase or family joke into an acronym. For example, pick a password like Wk?Wc?, which only you know is short for "Who knows? Who cares?" Or do the same with a song or a book title. (Don't use the title of the book that's on your desk next to the computer.)

Passwords, unlike usernames and filenames, are always case-sensitive. If your password is Wk?Wc? and you type in WK?WC?, the password won't be recognized.

On a network, overall password policy is set by the administrator. So passwords may be required to have a minimum length, and you may have to change your password at regular intervals.

 

CREATING A PASSWORD RESET DISK

The minute you turn on password protection for an account, you should create a password reset disk for that account. Why? Because any administrator who can get on your PC can switch your password!

Unless you're using a Big Corporate Network, a password reset disk is a defensive maneuver. It guards you against the slings and arrows of others who use your PC.

Follow these steps to make a password reset disk:

  1. Choose Start, Control Panel, User Accounts.
  2. Click your account. The User Accounts applet asks what you want to change.
  3. In the Related Tasks section, double-click Prevent a Forgotten Password. The Forgotten Password Wizard starts.
  4. Click Next. The wizard asks for a drive. You can create a password reset disk on various kinds of removable drives, including flash drives or Flash Memory cards, but the most common is a simple floppy.
  5. Choose the drive you want to use for the password reset disk, and then click Next. The wizard asks for the current password.
  6. Type the password for the account, and then click Next. The wizard puts a small file called userkey.psw on the disk, and then displays the final screen.
  7. Click the Finish button.

No matter how many times you change your password, the last password reset disk created for that account still works. There's no reason to update the disk when you change your password.

Store the disk in a safe place. Anyone who gets the file can log on to your PC without knowing your password.

 

TO PATCH OR NOT TO PATCH

Microsoft periodically releases security patches for Windows XP. Most of the time, on most machines, the patches perform as advertised -- they fix a defect in the product. Fair enough. Beats a product recall, right?

Sometimes, though, the patches don't work right. The infamous UPnP patch debacle, starting in November 2001, saw Microsoft patching, re-patching and re-re-patching a hole in the part of Windows that listens for new items as they're attached to a network. The FBI's National Infrastructure Protection Center followed along after Microsoft like a kid cleaning up after his dog: NIPC issued a warning about the security hole, an update, another update, and ultimately an advisory that Microsoft had finally solved the problem.

If you used the old Windows Update for any amount of time at all, you've no doubt witnessed first-hand how the old Update program would fail to find important updates, or urge you to install the same updates twice, lock up, quit mysteriously, or insist on installing such "critical" updates as the one that removed the swastika symbol from a wayward Microsoft Office 2003 font. Critical?

Worse, many of those updates can't be uninstalled, so the old bugs in the Windows Update installer left you with unstable patches that were inconsistently applied.

Microsoft's new Windows Update doesn't suffer from the most egregious problems of its (many) predecessors. Microsoft spent tens -- maybe hundreds -- of millions of dollars to make sure that's so. But those of us who lived through the earlier versions won't soon forget the nightmares. Microsoft promises that Windows Update will be fixed real soon now. Believe it when you see it.

 

WHAT'S ALL THIS PATH STUFF?

A path is merely the file's address, similar to your own. When mailed to your house, a letter travels to your country, state, city, street, and finally, hopefully, to your apartment or house number. A computer path does the same thing. It starts with the letter of the disk drive and ends with the file's name. In between, the path lists all the folders the computer must travel through to reach the file.

For example, the path to your My Music folder might be like this: It starts from the computer's C: hard drive, travels through the Documents and Settings folder, and then goes through your user folder (which is named however you established it to be, Kate, for example), and then goes into the My Documents folder. And only then does it reach the My Music folder. The file's name (say you've saved the song Girl from Eponema on your PC) comes last.

In a path, a disk drive letter is referred to as C:\. The disk drive letter and colon make up the first part of the path. All the other folders are inside the big C: folder, so they're listed after the C: part. Windows separates these nested folders with something called a backslash, or \. The file's name comes last.

Put it all together, and you get C:\Documents and Settings\Kate\My Documents\My Music\Girl from Eponema. That's the official path of the Girl from Eponema file in Kate's My Music folder.

Windows XP automatically puts together the path for you when you click folders. Thankfully. But whenever you click the Browse button to look for a file, you're navigating through folders and showing Windows the path to the file.

 

BURNING PICTURES ON A CD

Do you have about a hundred gajillion pictures on your PC eating up hard disk space? If you have a CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, or DVD+RW drive, burning those pictures onto a CD, where they'll last for decades, is very easy. A CD certainly lasts longer than your hard drive, providing you don't gum it up with one of those sticky CD labels.

 

BURNING PICTURES COULDN'T BE EASIER:

  1. Make sure that your CD-R, CD-RW, DVD-R, or DVD-RW drive is installed and working.
  2. Start Windows Explorer. (Just choose, say, Start, My Pictures or Start, My Computer.)
  3. Navigate to the pictures you want to burn. If you're in a picture or photo album folder, Copy to CD appears in the Picture Tasks list.
  4. Select the picture(s) you want to burn; then click Copy to CD in the Picture Tasks list. If Copy to CD doesn't appear in the list, right-click one of the selected files (or folders) and choose Send To, CD Drive. A small CD icon appears in the notification area, next to the clock.
  5. Keep moving around Windows, gathering pictures that you want to burn. In spite of what the Picture Task list and right-click menu say, Windows actually copies the files you select to a staging area -- a place on your hard drive that holds files temporarily, before you burn them to CD.
  6. When you're done gathering files, choose Start, My Computer, your CD burner drive (whichever drive letter that is). Windows shows you the contents of the CD's staging area.
  7. Put a recordable CD in your CD burner and click Write These Files to CD. The CD Writing Wizard appears.
  8. Type the name you want to be burned on the CD; then click Next. If you've chosen too much data -- too many pictures -- the wizard alerts you.
  9. If you have too many pictures selected, don't do anything with the wizard.

    Instead, go back to the staging area and start deleting files or folders (right-click and choose Delete) until you're under the size limit. Don't worry -- you aren't deleting the pictures. You're just removing them from the staging area. Unfortunately, neither the wizard nor Windows offers a handy list of folder sizes or suggestions for what to trim. What you can do is right-click a folder, choose Properties, and see the folder's size.

  10. When you think that you've deleted enough files or folders, go back to the wizard, click Retry Writing the Files to CD Now, and then click Next.

    If you still have too many pictures selected, you get the warning again. Sooner or later, you have your picture collection trimmed down to the point where it can fit on the CD. At that point, the wizard starts writing files to the CD. Depending on the speed of your burner, it can take 20 minutes or more to burn a full CD.

  11. When the wizard finishes, click Finish. The wizard removes all the files from the staging area.
  12. Immediately try looking at the pictures on the CD.

Chances are very good that they're in excellent shape. Oh, and don't forget to label the CD with a Sharpie marker.

 

SEEING PREVIEWS OF YOUR PICTURES

Windows Me and XP have made it easier than ever to peek inside your graphics files. Instead of displaying a folder full of bland icons, Windows Me transforms each icon into a thumbnail-sized preview of the file's contents.

That makes it a lot easier to find the picture of Kitty eating the bamboo leaves after you dump 63 cat pictures into the same folder.

To turn on the previews, open the folder with the pictures, click View from its menu, and choose Thumbnails from the drop-down menu. Windows Me immediately replaces the icons with previews of your graphics and photos.

 

ADDING A NETWORK PRINTER TO YOUR MACHINE

If a new printer is placed on the network and shared with everyone, you'll be able to use it -- but only after you tell your computer about it. To add a networked printer to your Printers folder, follow these steps.

  1. Click on the taskbar's Start button, and slide the mouse up to Settings and over to Printers. Click on Printers.
  2. In the Printers folder, double-click on Add Printer. A helpful wizard program opens.
  3. Click Next. Check the Network Printer box to tell the wizard that the printer you want to use is on the network.
  4. On the wizard's next page, you can instruct the wizard to find a printer in the (Active) Directory. Or choose the second option to type the printer name or browse for a printer. Click Next.
  5. If you chose to search the directory, click Find Now. The wizard returns a list of printers available to you. If you chose to browse for a printer, you also see a list of shared printers in the Browse for Printers box.
  6. Highlight the printer you want to add and click Next.
  7. If you want the printer to be the default printer (the one your programs will use automatically), click Yes. Click Next again.
  8. The final wizard window summarizes the selections you made. If they're OK, click Finish. If the settings need adjustment, click the Back button.

Even if a printer actually exists, you may not be able to see it on the network because you haven't been granted access to it. The administrator is the only one who can fix that for you. But if you can see it, you probably have the right to use it, so go ahead and try.

 

RUNNING TWO VERSIONS OF THE SAME PROGRAM

Don't be confused by a program's icon on the desktop and a program's button on the taskbar along the bottom of your screen. They're two different things. The button at the bottom of the screen stands for a program that has already been loaded into the computer's memory. It's already running, ready for immediate action. The icon on your desktop or in Windows Explorer stands for a program that is sitting on the computer's hard disk waiting to be loaded.

If you mistakenly click the icon in Windows Explorer or on the desktop rather than the taskbar button, you load a second copy of the program. Two versions of the program are loaded: one running as a window and the other running as a taskbar button waiting to be turned back into a window.

Running two versions of a program can cause confusion -- especially if you start entering stuff into both versions of the same program. You won't know which window has the right version! So try to avoid this if, say, you're working on a word processing document. However, this practice can be useful when you want to view two different Web sites in Internet Explorer without having to use the Back and Forward buttons to navigate to each one. Just click on the taskbar buttons to switch between sites.

 

TAKING PROGRAMS OFF YOUR COMPUTER

Windows XP includes an uninstall utility that takes the pain out of removing unneeded or obsolete versions of a program from your computer. To uninstall a program, follow these steps:

  1. Click the Start button and then click Control Panel to open the Control Panel window.
  2. In the Category view, where you see a list of Control Panel categories, click the [Add or Remove Programs] hyperlink to open the Add or Remove Programs dialog box. In the Classic view, where you see individual Control Panel icons, double-click the Add or Remove Programs icon.
  3. Click the Change or Remove Programs button on the left side of the Add or Remove dialog box to display the Currently Installed Programs list box.
  4. In the Currently Installed Programs list box, click the program you want to remove (when you click a program name, the description expands to include a Change/Remove button or separate Change and Remove buttons).
  5. Click the Change/Remove button or the Remove button, if Change and Remove are separate.
  6. Click the OK button in the alert dialog box that appears to confirm your removal of the program. When the uninstaller finishes removing the program, click the Close button to close the Add or Remove Programs dialog box and to return to the Control Panel window.

Use the Windows XP uninstaller to get rid of any unwanted program that you've installed with the Add or Remove Programs Control Panel. Using this utility to remove a program (rather than just deleting the program folder) ensures that all vestiges of the program are removed from the system and that you get back every byte of storage space to which you're entitled.

To remove unneeded Windows components, click the Add/Remove Windows Components button in the Add or Remove Programs dialog box and then locate and remove the check mark from the components you want removed before you select the Next button. Remember that if you remove the check mark from a category of components rather than from a particular component within that category, Windows will remove all the components.

 

GET SHORTY

A shortcut is an icon that provides easy access to any program, document, or folder. A shortcut icon generally looks like the original icon, but it has a small arrow in the lower-left corner. The original (non-shortcut) icon for a program, document, or folder represents the actual file. So if you delete the original icon, you delete the entire underlying file. This is not a good thing. A shortcut, on the other hand, is a small link to the original icon. You can create, move, copy, and delete shortcuts at will without worrying about deleting the actual underlying file.

 

LISTENING TO THE RADIO ON WINDOWS

Who doesn't love music? It sets our toes tapping and puts a song in our hearts. But did you know you can use Windows XP to find some new favorite radio stations?

  1. Double-click the Internet Explorer icon on the Windows desktop to open the browser.
  2. Choose View, Explorer Bar, Media.
  3. In the resulting WindowsMedia.com pane, click a featured radio station, or click the More Radio Stations link.
  4. Click a Category of music. (Alternatively, you can click a link under the Editor's Pick heading or click a Listen Now link for one of the featured stations to go directly to a station).
  5. Click the link (which might be labeled Go Listen, Website, or just be the name of the station) for one of the stations.
  6. In the site that opens in a separate window, use the various tools and features on that site to control the music that's played there:
    • To listen to another station, close the window of the station that you selected and click another category or another station link.
    • To search for a station, enter a keyword in the Search text box and click the Search button.
    • To display a comprehensive radio guide, click the arrow on the Media Options button at the bottom of the Media pane on the left and choose Radio Guide.
    • Click an item in the Radio Guide to display more information, and then click one of two links: Add to My Stations or Visit Website to Play. If you add the item to My Stations, it is listed in the My Stations of Windows Media Player's radio feature so that you can play it with a single click.

 

LISTENING TO RADIO STATIONS

You can use Windows Media Player to listen to radio stations from around the world that broadcast on the Internet. You will need a computer with sound capabilities and an Internet connection.

To listen to radio stations:

  1. Click start to display the Start menu.
  2. Click All Programs to view a list of the programs on your computer.
  3. Click Windows Media Player.

    The Windows Media Player window appears.

  4. Click the Radio Tuner tab to listen to radio stations that broadcast on the Internet.

    A list of featured radio stations appears.

  5. Click the name of the radio station you want to play.

    Information about the radio station you selected appears.

  6. Click Play to play the radio station.

    Note: It the play option is not available, click the Visit Website to Play option to listen to the station using your Web browser. After a moment, the radio station begins to play.

    The Microsoft Internet Explorer window opens behind Windows Media Player, displaying the Web page for the radio station. To clearly view the Web page, click the window's button on the taskbar.

  7. To adjust the volume, drag the slider left or right to decrease or increase the volume.

 

RESIZING THE RECYCLE BIN

The Recycle Bin is a flexible place, willing to enlarge itself, as necessary, to accept your recently deleted files. By default, the space allocated by Windows for the Recycle Bin is up to 10 percent of your hard-drive space. If you think about it, that's a ton of space.

The Recycle Bin is constructed so that it keeps whatever ends up there until you manually delete it (or until the allocated disk space fills up). If the disk space fills up, then the oldest files in the Recycle Bin are deleted to make way for the newer items. If you have 8 GB (or more) set aside for the Recycle Bin, the sheer size of the allocated area means you're wasting a lot of disk space.

The solution is to change the amount of disk space allocated to the Recycle Bin:

  1. Right-click the Recycle Bin icon and choose Properties. Windows displays the Properties dialog box for the Recycle Bin. The dialog box contains a tab named Global and one tab for each system drive.
  2. On the Global tab, select the Use One Setting for All Drives option. You can configure your drives independently, but most people have no need to.
  3. Use the slider to specify a smaller percentage of your hard drive for Recycle Bin space. If you have a large drive or several large drives, consider setting the slider as low as one percent. (Remember that one percent of 80GB is 800MB. That's still a large block of disk space for the Recycle Bin.)
  4. Click OK.

How does resizing the Recycle Bin help unclutter your system? Simple: When Windows doesn't need to track as many deleted files, the operating system is more responsive.

 

USING REMOTE ACCESS

You're working on a project with a tight deadline and your computer starts to do really funky things. What did you do wrong? Luckily, your IS department is only a phone call away. When you call and explain the problem, suddenly the cursor on your screen starts to move by itself, opening menus, clicking buttons, and causing all kinds of voodoo-like havoc. What's going on? Odds are, your IS tech has used Windows XP's Remote Access to hack into your computer to fix the problem -- and hacking in this case is a good thing. Remote Access allows someone else to log on to your computer and control it, just as if they were sitting in front of it. They can tweak your computer, setting up what needs to be done, and your computer will run as good as new. (At least that's the concept.)

 

WINDOWS XP REMOTE ASSISTANCE

Remote Assistance is one of the best timesaving features of Windows XP. It does, however, have its limitations: (1) Both you and your consultant-friend must be running Windows XP; (2) If the person requesting assistance has a dial-up connection, he has to stay connected continuously from the time the invitation goes out until the Remote Assistance session ends.Remote Assistance may or may not work with home- and small-office DSL and cable modems. It doesn't work if either you or your consultant-friend is running the free version of ZoneAlarm (although you can configure the for-pay version of ZoneAlarm to open up port 3389). There's nothing magical about port 3389; it's just the hard-coded port that Remote Assistance always uses to communicate between two PCs. As more small offices and homes use fast Internet connections with DSL and cable modems - and the number of firewalls increases - the chances of being able to get Remote Assistance to work has sadly decreased. The problem isn't fast connections; RA works very well indeed over a fast Internet connection. The problem is the proliferation of firewalls. Most firewalls block port 3389.

 

CHANGING YOUR SCREEN'S RESOLUTION

You chose your designer day planner, glow-in-the-dark gel pens, and solid maple inbox for your real-world desktop, right? Why shouldn't the Windows desktop give you the same flexibility to make things look the way you like?

  1. Right-click the desktop to display a shortcut menu, and then choose Properties.
  2. In the resulting Display Properties dialog box, click the Settings tab.
  3. On the Settings tab, click the slider in the Screen Resolution area and move it to a higher or lower resolution.

    Higher resolutions, such as 1280 x 1024, produce smaller, crisper images. Lower resolutions, such as 800 x 600, produce larger, somewhat jagged images. The up side of higher resolution is that more fits on your screen; the down side is that words and graphics can be hard to see. One option: If fonts appear too small, change the Font Size setting on the Appearance tab of the Display Properties dialog box to be Large or Extra Large.

  4. Click OK to accept the new screen resolution.

 

CREATING A RESTORE POINT

When your computer's ailing, System Restore provides a magical way to go back in time to when your computer was feeling better. System Restore works by taking a daily snapshot of your computer's settings as well as an automatic snapshot before you install a new computer part (just in case the newcomer causes problems).

The problem is finding that one, magic restore point that makes everything better. Windows XP simply slaps a date onto its automated System Restore points along with the boring name System Checkpoint; it doesn't say, "This restore point is just after you installed Berzerkeroids -- and everything still ran fine!"

To maximize System Restore's potential, create your own restore points with your own labels. Here's how:

  1. When your computer's running especially well, call up System Restore by going to the Start menu's All Programs menu. From there, pop open the Accessories menu and then the System Tools menu, where you find System Restore. The Welcome to System Restore window appears.
  2. Choose Create a Restore Point and then click Next.
  3. When Windows asks you to describe your new restore point, type in something that helps you remember why you made the restore point. For instance, type in "Nothing has crashed for a week -- if only my computer could always run this smoothly!" You needn't add the date in your description because Windows automatically gives it a date stamp.
  4. Click the Create button, and you're done.

By creating your own restore points on good days, you'll know immediately which ones to use on bad days.

 

THE ETHICS OF RIPPING CDS

First, understand one thing: you can't copy a song and give the file to another person. There's no question about the ethics of illegally pirating music. You can make copies of music on CDs that you bought for your own private use. People try to hem and haw and weasel their way around the legalities, but these justifications are self-serving. The bottom line's pretty simple. In the U.S., you can make copies of any music that you bought in order to

  • Keep a backup for your own private use
  • Change the format (for example, so you can download it to a small music player) for your own private use
  • Rearrange the order in which the music is played (commonly via a playlist) for your own private use
  • Make compilations of your favorite songs for your own private use

You also can loan the original CD to a friend, and your friend can listen to it. But your friend can't make a copy of the CD.

That's it. The ethics and legalities of pirating are quite straightforward. The real ethics question is whether you trust Microsoft to control the future format of your music. If enough people use Microsoft's proprietary WMA format, Microsoft will have a great deal of influence on the future direction of digital music.

 

FINDING HELP AND SUPPORT

If you do not know how to perform a task in Windows, you can use the Help feature to find information about the task. Here's how:

  1. Click start to display the Start menu.
  2. Click Help and Support.

    The Help and Support window appears. Common help topics, ways that you can ask for assistance and the tasks for which you can receive help are displayed.

  3. To search for specific help information, click this area and then type a word or phrase that describes the topic of interest.
  4. Press the Enter key to start the search.

    Help topics that match the information you entered are displayed.

  5. Click the help topic of interest.

    The help topic you selected is displayed. Windows highlights each occurrence of the word or phrase you searched for.

  6. When you finish reviewing help information, close the Help and Support Center window.

 

HOW TO REALLY GET HELP

You use the Help and Support Center when you need help and support, right? Well, yes. Sorta. The Help and Support Center works best when

  • You want to learn about what functions big pieces of Windows perform, and you aren't overly concerned about solving a specific problem (for example, "What is Windows Media Player"?).
  • You have a problem that's easy to define ("My printer won't print").
  • You have a pretty good idea of what you want to do, but you need a little prodding on the mechanics to get the job done ("How do I change my desktop's picture?").

The Help and Support Center won't do much for you if you have only a vague idea of what's ailing your machine, if you want to understand enough details to think your way through a problem, if you're trying to decide on what hardware or software to buy for your computer, or if you want to know where the XP bodies are buried.

If you can't find the help you need in the Help and Support Center, expand your search for enlightenment in this order:

  • Far and away the best way to get help involves simple bribery. Buttonhole a buddy who knows about this stuff, and get her to lend you a virtual hand. Promise her a beer, a pizza, a night on the town -- whatever it takes. If your friend knows her stuff, it'll be cheaper and faster than the alternatives.
  • If your buddy is off getting a tan at Patong beach, you may be able to find help elsewhere on the Internet. Just type your question into Google or Yahoo! and see what comes up.
  • If all else fails, you can try to contact Microsoft by e-mail. You may qualify for free e-mail support using something called Microsoft Online Assisted Support. The best way to find out if you qualify, and connect with a support droid if you do, is to:
  1. Choose Start, Help and Support.
  2. Under the Ask for Assistance list, click Get support, or find information in Windows XP newsgroups.
  3. In the Support box, click Get Help from Microsoft.
  4. You connect to Microsoft's support site on the Internet, and at that point, you have a chance to review what support is available to you and how much it will cost.
  • As a last resort, you can try to contact Microsoft by telephone. Heaven help ya. Some pundits have observed that you'll probably have more luck with a psychic hotline. Be that as it may, the telephone number for tech support in the USA is (425) 635-3311; in Canada, it's (905) 568-4494.

 

WINDOWS XP'S HELP AND SUPPORT CENTER

When you choose Start, Help and Support Center, Windows XP presents you with a wide array of choices. Many of the top-level choices "drill down" to the same bits of information; by giving you many different ways to get to that information, Microsoft hopes to make finding what you need easier for you, even if you don't know the answer to your question in advance.

Windows Help morsels fall into several categories:

  • Overviews, articles, and tutorials: Explanatory pieces aimed at giving you an idea of what is going on, as opposed to solving a specific problem.
  • Tasks: Step-by-step procedures for solving a single problem or changing a single setting.
  • Walkthroughs: Marketing demos . . . uh, multimedia demonstrations of capabilities that tend to be, uh, light on details and heavy on splash.
  • Troubleshooters: Take you through a series of (frequently complex) steps to help you identify and resolve problems.

    Microsoft has tried hard to enable you to solve your own problems. At the same time, Microsoft has made it pretty difficult to figure out how to pick up the phone and chat with somebody in Product Support Services.

  • Few people will want to jigger with the Search Options. The Help and Support Center already looks in all the places it can; your only options are to cut off certain types of searches entirely.
  • Live, one-on-one support from Microsoft is notoriously uneven. One day you get a support rep who can solve your problem in the blink of an eye. The next day you spend hours on hold, only to be told that you need to reformat your hard drive and reinstall Windows.
  • When Troubleshooters work, they work well, but they cover only the most basic problems and the most direct solutions.
  • Although Remote Assistance is a great idea, in practice the idea has plenty of problems: Both you and your assistant have to be connected to the Internet (or to the same local network) and if firewalls exist between you, Remote Assistance might not work at all.
  • Windows newsgroups on the Internet are unmoderated, which means anybody can post anything. Many well-meaning support group participants dole out utterly terrible advice.
  • Sometimes Windows Updates are worse than the problem they're supposed to fix. Wait for an update to be in general circulation for at least a week before you apply it to your machine. That way, Microsoft has a chance to withdraw or reissue problematic updates (of which there are many).
  • The Hardware and Software Compatibility lists leave much to be desired. If a piece of hardware or software that you want to buy appears on the list, it's probably at least a little bit compatible. If it isn't on the list, you can't really draw much of a conclusion.

 

LEAVING SCRAPS ON THE DESKTOP DELIBERATELY

The Clipboard is a handy way to copy information from one place to another, but it has a major limitation: Every time you copy something new to the Clipboard, it replaces what was copied there before. What if you want to copy a bunch of things from a document?

If you are cutting and pasting over a real desktop, you can leave little scraps lying everywhere, ready for later use. The same scraps concept works with Windows Me: You can move information from window to window, using the desktop as a temporary storage area for your scraps of information.

For example, suppose that you have some paragraphs in a WordPad document that you want to copy to some other places. Highlight the first paragraph, drag it out of the WordPad window, and drop it onto the desktop. Poof! A small Scrap icon appears on your desktop. See another interesting paragraph? Drag it onto the desktop as well: Another Scrap icon appears.

Eventually, you'll have copies of your report's best paragraphs sitting in little scraps on your desktop. To move any of the scraps into another document, just drag them into that other document's window and let go.

Any remaining, unused scraps can be dumped into the Recycle Bin or simply left on the desktop, adding a nice, comfortable layer of clutter.

To make a scrap, highlight the information you want to move, usually by running the mouse pointer over it while holding down the mouse button. Then point at the highlighted information and, while holding down the mouse button, point at the desktop. Let go of the mouse button, and a scrap containing that information appears on the desktop.

Note: Not all Windows Me applications support Scraps. In fact, WordPad is probably the only program in the Windows Me box that makes good use of Scraps. Other programs, such as Microsoft Office 2000, let you use scraps, though, so you haven't wasted your time reading about them.

 

FINDING A WINDOWS THAT'S OFF THE EDGE OF THE SCREEN

Even a window at the top of the pile can be nearly invisible. A window can be moved anywhere on the Windows Me desktop, including off the screen. In fact, you can inadvertently move 99 percent of a window off the screen, leaving just a tiny corner showing. Clicking on the window's name in the taskbar won't be much help in this case, unfortunately. The window's already on top, but it's still too far off the screen to be of any use.

  • If you can see any part of the rogue window's title bar -- that thick strip along its top -- hold the mouse button down and drag the traveler back to the center of the screen.
  • Sometimes, a window's title bar can be completely off the screen. How can you drag it back into view? Start by clicking on any part of the window that shows. Then hold down your Alt key and press the spacebar. A menu appears from nowhere. Select the word Move, and a mysterious four-headed arrow appears. Press your arrow keys until the window's border moves to a more manageable location and then press Enter. Whew! Don't let it stray that far again!

 

SCREENTIPS: HELP OR HINDRANCE

Windows XP extensively uses ScreenTips to provide a way of adding commentary or footnotes to features. When you run your mouse pointer over a certain part of the screen, a little black-outlined, pale-yellow rectangle pops up with some more or less informative text. In some cases, such as with some Internet search results, this text can amount to a paragraph's worth of context-sensitive material.

 

SEARCHING WITH AN ANIMATED CHARACTER

When you open the Search Companion for the first time, Windows XP asks whether you'd like to search with or without an "animated character." Cartoon lovers can choose the character option: a little doggy, a gal in a spaceship, a surfing alien, or Merlin the Wizard. The joyful little character subsequently watches your moves, blinking, barking, or twitching when you click it. (It doesn't do anything more helpful than that.)

When you tire of the barks, blinks, and twitches, turn off the animated character by choosing the Change Preferences option. When that menu appears, choose Without an Animated Screen Character to purge the little goofball. (Or choose another character from the same page.)

 

SHORTCUTS

Windows shortcuts aren't so good at keeping track of the files they point to if you move those files. If you create a shortcut to a file or program and then move that file or program to a different folder, the shortcut won't be able to find that file or program anymore. Windows will panic and try searching for it, but may not be able to find it. The actual shortcuts themselves, by contrast, can be moved anywhere without problems.

 

CREATING A FAST SHUT DOWN ICON IN WINDOWS XP

Buried deep inside Windows XP lurks a little-known program called shutdown that shuts down your system in a very fast - but orderly - way.

Here's how to put an icon on your desktop that'll shut down your machine quickly:

  1. Right-click any empty location on your desktop.
  2. Click New, Shortcut.

    The Create Shortcut Wizard appears.

  3. In the Type the Location of the Item box, type shutdown -s -t 0.

    It's important that you put spaces before each hyphen, that you have no spaces after each hyphen, and that you use a zero at the end.

  4. Click Next.
  5. In the Type a Name for This Shortcut box, use a name that will remind you that this button is for a very quick shut down.
  6. Click Finish.

    You have a new shortcut on your desktop.

  7. Right-click the shortcut and click Properties. Click the Change Icon button.
  8. Pick an appropriate icon for the shortcut and double-click it.
  9. Click OK, and your new, quick shut down shortcut appears on the desktop.

To test the new, fast shut down icon, make sure no programs are running, and double-click it. On a typical machine, you see the log-off screen in about three seconds, and after another two or three seconds, you get the "It is now safe to turn off your computer" message.

This isn't a leisurely process. Windows gives you a short period of time to save changes in your Office documents, and other applications quit in an orderly way.

 

SHUTTING DOWN A NON-RESPONSIVE APPLICATION

What do you do when your system just freezes up? If you're trying to shut down a non-responsive application, press and hold down Ctrl+Alt+Del, which brings up the Task Manager and lets you close the non-responsive software. If you still can't close out of the problem application, press Ctrl+Alt+Del once again and Windows reboots. Sometimes this solves the problem, and you can get right back to work. Note that some applications use an Auto Save feature that keeps an interim version of the document that you were working in and you might be able to save some of your work by opening that last-saved version. Other programs don't have such a safety net, and you simply lose whatever changes you made to your document since the last time you last saved it. The moral? Save, and save often.

 

SHUTTING DOWN WINDOWS

Although the big argument used to be about saturated and unsaturated fats, today's generation has found a new source of disagreement: Should a computer be left on all the time or turned off at the end of the day? Both camps have decent arguments, and there's no real answer (except that you should always turn off your monitor when you won't be using it for a half hour or so).

However, if you decide to turn off your computer, don't just head for the off switch. First, you need to tell Windows about your plans.

To do that, click the Shut Down command from the Start menu and then click the Shut Down button from the box that appears. Finally, click the Yes button; that click tells Windows to put away all your programs and to make sure that you've saved all your important files.

After Windows has prepared the computer to be turned off, a message on the screen says that it's okay to reach for the Big Switch.

The Windows Shut Down menu offers several options now, as you can see by the following list:

  • Shut down: Click here, and Windows saves your work, prepares your computer to be shut off, and automatically turns off the power. Use this option when you're done computing for the day.
  • Restart: Here, Windows saves your work and prepares your computer to be shut off. However, it then restarts your computer. Use this option when installing new software, changing settings, or trying to stop Windows from doing something weird.
  • Standby: Save your work before choosing this one; it doesn't save your work automatically. Instead, it lets your computer doze for a bit to save power, but it wakes up at the touch of a button.
  • Hibernate: Only offered on some computers, this works much like Shut down. It saves your work and turns off your computer. However, when turned on again, your computer presents your desktop just as you left it: Open programs and windows appear in the same place.

The Hibernate command takes all of your currently open information and writes it to the hard drive in one big chunk. Then, to re-create your desktop, it reads that big chunk and places it back on your desktop. It's not as safe as shutting down your computer.

Don't ever turn off your computer unless you've first used the Shut Down command from the Start button. Windows needs to prepare itself for the shutdown, or it may accidentally eat some of your important information.

 

GETTING RID OF PREINSTALLED SOFTWARE

One of the things (among many) that drives a lot of computer users crazy is preloaded software. You buy a computer from Dell, Gateway, or any number of other retailers, and they throw in a boatload of software, already installed on the computer. The problem is that most of the software is of very little value. Sometimes all of the software is of no value. It's easy to fill up a computer with no-value software and tout what a great deal you're getting. Hogwash!

Did your computer come with lots of software preinstalled? If so, take a few minutes to figure out how much of it you actually use. Take a look at what was installed when you got your system and add the unused software to your list of removal targets. Don't worry; removing preinstalled software won't make your computer stop working, void your warranty, or subject you to criminal prosecution. (Unlike that stupid little tag on mattresses that you might still be scared to remove.)

 

CREATING A SPEECH-RECOGNITION PROFILE

The best way to set up your Windows XP speech-recognition system is to create your own speech profile. Doing so will take you through a wizard that simplifies the process. And if you share a computer with other users, your speech profile will automatically be selected and ready to go each time you log on to the computer.

The process of creating a speech profile takes about 10 or 15 minutes. Try to set aside a time when you won't be disturbed, and try to make the room as quiet as possible. When you're ready to roll, follow these steps:

  1. Open the Control Panel
  2. In Classic view, open the Speech icon and click the Speech Recognition tab.
  3. Click the New button to create a new profile.
  4. When the wizard starts, just follow the instructions.

 

GET STARTED AGAIN

To open the Start menu on the Windows taskbar with the keyboard, press Ctrl+Esc. If you want to see the underlined command letters for navigating Windows menus and dialog boxes at all times, follow these steps:

  1. Right-click the Windows desktop and then click Properties on the shortcut menu.
  2. Click the Appearance tab in the Display Properties dialog box.
  3. Click the Effects button in the Display Properties dialog box to open the Effects dialog box.
  4. Click the Hide Underlined Letters for Keyboard Navigation Until I Press the Alt Key check box to remove that check mark and then click the OK button.

 

WHY YOU CAN'T JUST SWAP OUT THE GUTS

In geekspeak, swapping out the guts means moving the hard drive from one system to another system. The hard drive, after all, has the operating system, program, and data that you used on your old system. Moving the hard drive from one system to the other could save quite a bit of time -- or not!

There's an interesting thing that happens when you install Windows. The operating system takes stock of its surroundings and writes information about your system into its Registry (and a couple of other places). This includes information about your process, memory, and peripherals.

Change out your peripherals, no problem. Change the amount of memory, no problem. Change the processor? Big problem.

If you're running with a Windows edition older than XP, the only way to fix the problem is to wipe the hard drive, reinstall the operating system, and start fresh. Windows XP is a little smarter -- but only a little. If you have Windows XP on the hard drive, you can move the drive to a new system but still need to do a system reinstall. Your data and programs remain intact, but stick XP on the system so it recognizes the new processor.

Of course, the ironic part of this whole scenario (moving the hard drive) is that if you were able to do it successfully, you would also be moving all the clutter from your old system to your new.

 

GETTING INTO A SONG'S TAGS

Inside every music file lives a form containing the song's title, artist, album, and similar information. When deciding how to sort, display, and categorize your music, Windows Media Player reads those tags -- not the songs' filenames. Most portable music players, including the iPod and Dell DJ, also rely on tags, so it's important to keep them filled out properly.

It's so important, in fact, that Media Player normally fills in the tags for you when it adds files to its library.

Many people don't bother filling out their song's tags; other people keep them meticulously updated. If your tags are filled out the way you prefer, stop Media Player from messing with them. Just click Options from the Tools menu, click the Library tab, and clear every box in the Automatic Media Information Updates for Files category. If your tags are a mess, leave those boxes checked so Media Player will clean up the tags for you.

To edit a song's tag manually in Media Player, right-click on it in the library and choose Advanced Tag Editor.

 

SETTING THE COMPUTER'S TIME AND DATE

Many computer users don't bother to set the computer's clock. They just look at their wristwatches to see when it's time to stop working. But they're missing out on an important computing feature: Computers always stamp new files with the current date and time. If the computer doesn't know the correct date, it stamps files with the wrong date. Then how can you find the files you created yesterday? Last week?

Also, Windows Me sometimes does some funny things to the computer's internal clock, so you may want to reset the date and time if you notice that the computer is living in the past (or prematurely jumping to the future).

To reset the computer's time or date, double-click the little clock Windows Me puts on the taskbar that lives along the edge of the screen. Windows Me brings up the Date/Time menu for you to make adjustments.

  • Moved to a new time zone? Click the Time Zone tab along the top of the window. Click the downward-pointing arrow next to the currently listed time zone. A long list of countries and locations appears; click the one where you're currently hanging your hat.
  • Windows Me has a Search program, which I describe in Chapter 7, that can locate files by the time and date they were created, modified, or last accessed - but only if you keep your computer's date and time set correctly.
  • Most computers have an internal clock that automatically keeps track of the time and date. Nevertheless, those clocks aren't always reliable, especially among laptops with "power-saving" features. Check your $2,000 computer's clock against your $20 wristwatch every few weeks to make sure that the computer is on the mark.

 

DISPLAYING IE'S TIP OF THE DAY

If you're new to this whole browsing thing and you want to have a little help along the way, you can turn on IE's Tip of the Day feature. The tips appear in the bottom portion of your screen, which takes up a little real estate, but they provide simple suggestions that you can try as you work.

To display the Tip of the Day, follow these steps:

  1. Choose Help in the menu bar. The Help menu opens.
  2. Click Tip of the Day. A new pane opens just above the status bar at the bottom of the Internet Explorer window. You may get a security warning. If so, click the warning message and choose Allow This Page to Access My Computer.
  3. Review the tip and then, if you want to see another tip, click Next Tip.

    If you want to close the tip box, click the X (Close) button to the left of the tip area.

 

KEEPING TRACK OF YOUR FAVORITE TUNES

You can use Windows Media Player to record and organize your music as well as to play your favorite tunes. Windows Media Player in Windows XP makes it easy to copy music from audio CDs or from the Internet radio stations to which you listen. You can then organize the music that you copy onto the hard drive into playlists that you can play in Windows Media Player or copy onto portable devices, such as a portable MP3 player. If your computer has a CDR (CD recordable) or CDRW (CD rewritable) drive, you can even copy the music files onto blank CDs that you burn.

 

CHECKING OUT TUTORIALS

Confused by something in Windows? Ever wish you could watch a demonstration or follow a wizard to solve your problem step by step? Wait, you can!

  1. Choose Start, Help, Help and Support Center. From here, you can locate tutorials here in a couple ways:

    Enter the word tutorial in the Search text box and click the arrow button. Links to the first 15 tutorials appear. (Fifteen is the default number of search results.) Click a link to run a tutorial.

    When you run a search, the Suggested Topics section of the results typically divides into two sections: Pick a Task; and Overviews, Articles and Tutorials. Any item in the second area that begins with the word Practice is a tutorial.

  2. Click a tutorial link to run it. It runs, opening a window that plays images along with an audio narration and a toolbar. Do one of the following:

    When you're instructed to by the narration, perform an action, such as clicking a link in the tutorial window.

    Use the tutorial toolbar to navigate through the tutorial. For example, use the Previous Topic, Jump Back, Jump Ahead, or Next Topic buttons to move through the tutorial content, and use the Pause and Stop buttons to take a break from the tutorial or stop it from running.

    Use the tutorial toolbar to get more help with the More Information, Glossary, Tip, and Help buttons.

    Close a tutorial by clicking the Close button in the tutorial window.

Tutorials are played by using the Macromedia Flash Player. To modify the way the player works, when a tutorial first begins, right click the tutorial screen and choose Settings. These settings control privacy, microphone recording volume, camera settings, and how much storage space is used on your hard drive to play the tutorials. To adjust playback volume, click the volume control on the Windows taskbar and move the sliders up and down to make the sound louder or softer.

 

ADDING YOUR PICTURE TO YOUR USER ACCOUNT

Adding a picture of yourself to your User Account isn't tough, provided that you have a digital image of yourself stored on your computer.

Don't have a digital image of yourself? Then find a friend with a digital camera, have her snap your picture, and store the picture in your My Pictures folder as a JPG file. Then follow these steps to put that picture on your account.

  1. Click the Start button, choose Control Panel, and select User Accounts.
  2. Click Change My Picture.

    If you're the administrator, you might need to click Change an Account, choose an Account, and then choose Change the Picture.

  3. Choose an existing picture or choose Browse for More Pictures.

    If you choose the Browse option, your My Pictures folder opens up, showing its contents.

  4. Locate your saved picture, click its name, and click Open.

Windows grabs your picture, shrinks it to thumbnail size, and sticks it on your account.

 

OPTIMIZING VIDEO PLAYBACK

In Windows, movies don't always play back smoothly. If your computer and its modem aren't fast enough and expensive enough to keep up the fast pace, the movie looks jerky. The problem is that Windows Media Player skips part of the movie to keep up with the soundtrack. Here are a few tips for smoother sailing when watching movies:

  • Use the fastest modem available in your area. Faster computers also process videos faster. Don't be tempted to choose faster download speeds than your modem can handle.
  • Movies play back at their fastest when they are either full-screen or in a small window.
  • Right-click on a video while it plays to see different size options. Choose Fit in Window to make the video expand and contract as you change the window's size to find the best size for playback.

 

WINDOWS UPDATE OPTIONS

In Windows XP, you have three options for using Windows Update:

  • Download the updates automatically. This first option downloads updates as they become available. You may not even be aware of the download. However, the download won't be installed automatically. Instead, you see a notification message that you can click to install the downloaded files.
  • Notify me before downloading. Updates are not downloaded to your computer behind the scenes. Instead, you are notified when a download is ready. You can then choose when you want to start the download.
  • Turn off automatic updating. Choosing this option disables automatic updating altogether. But you can still update manually at any time using Windows Update.

 

UPGRADING TO WINDOWS XP

Thinking about upgrading to Windows XP? Microsoft touts the following parts as required in order to run it.

  • A Pentium 300 MHz microprocessor. However, a faster computer, such as a Pentium III or Athlon running at 500 MHz means you'll spend less time waiting for Windows XP to do something exciting.
  • 64 MB of memory (RAM). Windows XP moves much more comfortably with 128MB. Bump that to 256MB or more if you plan to run programs like Microsoft Office and multimedia tools.
  • 2GB of free hard disk space. 20GB of free hard disk space provides more space, or 40GB or larger will allow your computer to be useful for a long time.
  • A 3 1/2-inch high-density disk drive. Although the disk drive is not necessary, occasionally a Windows program still comes packaged on high-density, 3 1/2-inch floppy disks. Plus, floppy disks are a handy way to move your files to other computers.
  • Color SVGA card. To view videos, look for these qualifications: 32MB or more of memory, AGP support, motion compensation support for DVD playback, and support for DVI, S-Video, and composite video output.
  • 12x or faster CD-ROM or DVD drive. Either drive will install Windows XP.
  • Internet access. A 56K modem or faster allows for less time you'll spend twiddling your thumbs.
  • Any PS/2-compatible mouse.
  • A 15-inch monitor or larger. Although expensive, you may want a larger monitor such as an LCD monitor. The bigger your monitor, the bigger your desktop: Your windows won't overlap so much.

 

UPGRADING TO XP

If you're upgrading Windows from an earlier version, Microsoft gives you a price break. In fact, most of the boxes you see on store shelves are for the upgrade version of Windows XP. You don't need to have an older version of Windows running on the machine in question in order to take advantage of the upgrade. If there's no older version of Windows hanging around (perhaps you deleted it in order to perform a clean install of Windows XP), all you need to do is insert an old Windows CD (Windows 95, 98, 98SE, ME, NT 4, or 2000) for a moment at one specific point early in the installation process. There's no check to see if the old version of Windows has been registered properly — on this or any other machine. All the upgrade requires is that old CD.

 

WHAT'S NEW IN WINDOWS VISTA

Even if Windows XP is running fine on your PC, Microsoft hopes the following improvements in Windows Vista will push your hand toward your credit card.

  • Streamlined Start menu: The bright-blue Start button in the bottom-left corner of the desktop is always ready for action. Your Start menu will change as you work, constantly updating itself to list your favorite programs on its front page. That's why the Start menu on your friend's computer is arranged differently than the Start menu on your computer.
  • Quick Search: Instead of forcing you to search for your files time and again, Vista automatically remembers your files' locations. For example, search for every document mentioning "celery," and Vista lets you save the results as a Celery folder. Whenever you create new documents mentioning "celery," Vista automatically drops them into the Celery folder for easy retrieval.
  • Live taskbar thumbnails and other visual cues: Microsoft spent some time decorating Vista with a three-dimensional look. When you can't find an open window, for example, hold down the Windows key and press Tab. All the open windows appear on your PC in a Flip 3D view. Hover your mouse pointer over any name listed on your desktop's taskbar, and Vista displays a thumbnail picture of that window's current contents, making the window you're looking for much easier to retrieve from the sea of programs.
  • Integrated multimedia experience: Vista's new version of Media Player sports streamlined, easier-to-use controls. The big star, however, is Vista's Media Center, which lets you watch television on your PC and even record shows onto your hard drive for later viewing. Recording TV shows requires two important things, however: a TV tuner in your PC and the proper version of Vista. (Vista comes in a startling five versions.) Installing a TV tuner can be as simple as plugging a box into your PC's USB port or sliding a card inside your PC.

 

ADJUSTING VISUAL EFFECTS TO SPEED UP YOUR COMPUTER

As it frantically crunches numbers in the background, Windows XP tries to project a navel-gazing image of inner peace. Its menus and windows open and close with a slow fade; aesthetically pleasing shadows surround each menu and the mouse pointer. When a folder opens, Windows automatically chooses its appropriate task pane. Windows also organizes the Control Panel's icons into neat categories instead of presenting one folder crowded with icons.

All these extra visual decisions require extra calculations on Windows's part, however, slowing it down a bit. To change Windows' attitude from peaceful to performance, head for the Control Panel's Performance and Maintenance category and choose Visual Effects.

For fastest action, choose Adjust for Best Performance. Windows quickly strips away all the visuals and reverts to Classic Mode -- a faster way of working that mimics earlier, no-frills Windows versions. Choose Adjust for Best Appearance for a prettier, but slower, Windows.

To let Windows XP examine your computer's processing power and choose a balance between aesthetically pleasing and physically overburdened, select Let Windows Choose What's Best for My Computer.

Bored? Experiment with each visual setting by choosing Custom. Choose Apply after making each change; if you notice an unwelcome change in Windows XP's behavior, reverse your change and click Apply again.

 

WINDOWS VISUAL EFFECTS AREN'T ALWAYS SPECIAL

Today is Ash Wednesday, so naturally you may want to know how to turn off those annoying visual effects, such as menu fades. (How's that for a non sequitur?) Windows XP tries to be calm, cool, and collected; its menus fade in and out to make everything look smooth. However, after you get over the novelty of how cool menu fades are (and you will), you'll undoubtedly find that they just slow you down. So to choose between the calm and the speedy, head for the System icon in the Control Panel, click the Advanced tab, and then click Settings under the Performance area.

Choose Adjust for Best Appearance to keep everything smooth. Or choose Adjust for Best Performance to speed up your menus. Or choose Custom to pick your own settings -- if you or anyone else can figure out what they mean. Don't like the results? Click Let Windows Choose What's Best for My Computer to return to normal.

 

CHANGING THE VOLUME

Although Microsoft designed Windows XP to be easier than ever to use, the programmers stubbed their toe when it came to the most important function of all: changing the volume.

Here's how to put the volume control back where it belongs -- right next to the little clock in the bottom right corner of the screen:

  1. Click the Start button, open the Control Panel, and click the Sounds, Speech, and Audio Devices icon.
  2. Click the Sounds and Audio Devices icon and select the Place Volume Icon in the Taskbar check box. A little speaker then appears next to your clock.
  3. Click OK to close the window.

Now, if you need to turn the sound up or down in a hurry, click the little speaker by your clock. A sliding volume control appears, letting you turn the sound up or down by sliding the control up or down. Or, to turn the sound off completely, click the Mute box. Whew!

 

MORE ABOUT YOU PCS WALLPAPER OPTIONS

What can there possibly be to know about wallpaper? Read on, you might be surprised.

  • Wallpaper can be tiled across the screen or centered. Small pictures should be tiled, or painted repeatedly across the screen. Larger pictures look best when they're centered. Windows 98 adds a stretch option, which expands a single picture to fill your screen. Select your preference by selecting it from the Display box.
  • Anything you create in Windows 98 Paint can be used as wallpaper. In fact, you can even use Paint to alter the wallpaper Microsoft provided with Windows.
  • When using wallpaper, turn off your Active Desktop feature, or Windows might be confused the next time you turn on your computer. To turn it off, right click on your desktop, click the [A]ctive Desktop, and click View As [W]eb Page to remove the check mark.
  • Wallpaper looks like a lot of fun, but it may be too much fun if your computer doesn't have more than 8MB of RAM. Fancy, colorful wallpaper files can use up a great deal of the computer's memory, consistently slowing Windows down. If you find yourself running out of memory, change the wallpaper to the (None) option. The screen won't look as pretty, but at least Windows works.
  • Small files that are tiled across the screen take up much less memory than large files that are centered on-screen. If Windows 98 seems slow or it sends you furtive messages saying that it's running out of memory, try tiling some smaller bits of wallpaper.
  • Patterns, accessed through the [P]attern button, are a poor-man's wallpaper. They're only one color, and they don't vary much. If Windows keeps complaining about needing more memory, however, dump your wallpaper and switch to patterns. They don't eat up nearly as much memory.
  • And of course, if you spot an eye-catching picture while Web surfing, you can click that Web site's picture with your right mouse button and select the Set as [W]allpaper option. Sneaky Microsoft copies that picture to your desktop and leaves it on the screen as your new wallpaper. (Just keep the image on your own desktop; don't try to sell it or give it away, or you might run afoul of copyright laws.)

 

COPYING A WEB ADDRESS

Sometimes, clicking on a Web address doesn't take you to the page. For example, if a friend e-mails you an address, you may need to type it in by hand. But here's how to avoid any misspellings: Highlight the Web address by holding down your mouse button and sliding the pointer over the address. Then hold down the Ctrl key and press C. (That copies the address.) Now, click in your browser's address box and, while holding down the Ctrl key, press V. By doing so, you paste the address in the address box. Press Enter, and your browser should whisk you off to that new site.

 

ONCE A WEEK SHOULD DO IT

All across America, in offices large and small, people start watching the clock at about 2:00pm on Fridays. Time seems to slow down as the weekend beckons. But Friday afternoons are a great time to do a few Windows-related clean-up tasks every week.

  • Delete temporary files: Temporary files tend to proliferate, for a variety of reasons, and do nothing but occupy space. Locate them, delete them, and then empty the Recycle Bin.
  • Make backups: If you don't already do it daily, make backups of your data. Folks, this is cheap insurance. It isn't a matter of whether you need your backups, but when you need them because you will need them - so make backups! After you make the backups, store them somewhere safe.
  • Clean out the root directory: The root directory is a special place on each hard drive; it represents prime real estate in the file-storage world. (The root directory for the C: drive is C:\.) Unfortunately, root directories also have a tendency to become cluttered easily. If you take a look at them once a week and clean them out as necessary; it helps keep your operating system happier. You probably don't want to delete files willy nilly, but the only folders that should be in the root directory are those that represent major data divisions, move folders of lesser importance elsewhere.

After you get good at completing these weekly tasks, they won't take you long at all. Plus, your system will be cleaner and your data more secure. Don't you feel better now? Is it quitting time yet?

 

ACTIVATE A WINDOW

A window must be active before you can select or use any of its features. To activate a window, click anywhere on it. The active window is immediately placed on top of the desktop and its title bar becomes highlighted.

 

MAKING A WINDOW FILL THE WHOLE SCREEN

Why can't you just put one huge window on-screen? Well, you can.

To make any window grow as big as it gets, double-click on its title bar, that topmost bar along the top of the window. The window leaps up to fill the screen, covering up all the other windows.

To bring the pumped-up window back to normal size, double-click on its title bar once again. The window shrinks to its former size, and you can see everything that it was covering up.

  • When a window fills the entire screen, it loses its borders. That means you can no longer change its size by tugging on its title bar or dragging its borders. Those borders just aren't there anymore.
  • If you're morally opposed to double-clicking on a window's title bar to expand it, you can expand it another way: Click on the window's maximize button, the middlemost of the three little boxes in its top-right corner. The window hastily fills the entire screen. At the same time, the maximize button turns into a restore button; click on the restore button when you want the window to return to its previous size.

 

DEALING WITH WINDOWS IN WINDOWS

In Windows 95, 98, Me (Millennium Edition), and Windows XP, you encounter several types of windows. Following are a few pointers on how to use them:

  • A window must be active before you can select any of its commands or use any of its features. To activate a window, click anywhere on it. The active window is immediately placed on top of the desktop and its title bar becomes highlighted.
  • Change the size of a window by dragging its borders with the mouse or by using the Size command.
  • To move a window on the desktop, position the mouse pointer somewhere on the window's title bar and drag the outline to the new location.

 

WHAT IS WINDOWS XP HOME EDITION?

Windows XP, the most powerful of Microsoft's Windows software, comes in two basic versions: Windows XP Home Edition and Windows XP Professional. Chances are, you'll use Windows XP Home Edition, the version designed for homes and small businesses. Like its predecessor, Windows Me, Windows XP Home Edition supports networking, modem sharing, and other fancy tricks. You can install Windows XP Home Edition over Windows 98 and Windows Me (but not Windows 95, Windows NT, or Windows 2000).

 

LOGGING ON TO WINDOWS XP

Windows XP allows bunches of people to work on the same computer by doling out a separate account to each user. For this reason, it seems like every person in the house has his or her own computer, set up the way he or she likes it. For example, Harry's desktop is packed with icons that load his favorite games, while Neria's desktop contains Internet links to her favorite finance and watercolor Web sites.

Getting started is simple -- log on and introduce yourself by clicking your user name. A few seconds after you click, Windows XP shows you your desktop, ready for you to make a mess.

 

OFF TO SEE THE WIZARD

Windows XP supports home networking that enables your home computers to share resources (such as a single printer) and allows the networked computers to share a single Internet connection. To set up your home network (assuming that each computer is equipped with a network adapter that connects with the appropriate cable), you can use the Home Networking Wizard to configure your network. To start the Home Networking Wizard, open the My Network Places window by clicking the Start button and then clicking My Network Places on the Start menu and then click the [Set Up a Home or Small Office Network] hyperlink in the Network Task section of the My Network Places navigation pane.

 

WHAT'S THIS?

Windows XP constantly flings confusing questions onto the screen, expecting you to come up with an answer. If you know where to tackle the program, however, you can often shake loose some helpful chunks of information.

When a particular button, setting, box, or menu item has you creatively stifled, click it with your right mouse button. A What's This? box often appears, letting you know that Windows XP can offer help about that particular area. Click the What's This? box, and Windows XP tosses extra information onto the screen, explaining the confusing area you clicked.

 

WRITE PROTECTION AND WINDOWS XP

Write protection is supposed to be a helpful safety feature, but most people discover it through an abrupt bit of computer rudeness: Windows XP stops them short with the following threatening message: Cannot copy Ouch!: The media is write protected, while they are trying to copy a file to a floppy disk or CD.

If you encounter this write-protect error, wait until the floppy drive stops making noise. Remove the disk, unwrite-protect the disk, and put it back in the drive. Then, repeat what you were doing before you were so rudely interrupted.